Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Hi, <br>
<br>
I found a 2001 L35 w/ ~650 hours, w/ 5 foot 3pt manual gannon. It appears in good shape sans some scrapes and faded paint from the years in the Arizona Sunshine.<br>
<br>
Is 21,500 a fair price? Any know mechanical weaknesses to look out for or consider? <br>
<br>
Any help Appreciated!<br>
<br>
Thanks,<br>
<br>
RB

2001 L35 TLB price
Kubota Tractors
Replies 2 Post by rob in arizona

Peters, I don't know anything about ICF but I am going to research the product. I don't know if builders are using it in the local area, if not it maybe be too costly. Thanks for the info. Dave

building costs
Home Improvement
Replies 32 Post by kyvette

It looks like a very practical and useful machine. I could use something like that around the ranch. I notice that the top end speed was 25 mph which is a good bit faster than the Kubota RTV 900 and definitely more hp at nearly 50 hp. I REALLY like the reversable pto. That is a HUGE advantage with a PHD! Does this machine have any type of drive train suspension? Reason I ask is that my 4410 in C range wide open and flat out is REALLY unstable if you start going over bumps or uneven ground or pavement. The Tructor almost looks as if it could fill in for limited duty in place of a Polaris Ranger XP if it has some suspension flex capability to traverse rough terrain. It would be interesting if you could expand on these areas. Thanks!

choosing the right tractor
New Holland Tractors
Replies 11 Post by Chief

Shortmag - I know how fast the bike is. In 1996 I got a CBR600F3. Fun bike. But then in 1998 I moved to northern Minnesota. No hills. No curves. Roads just went straight and were flat. I dropped my garage door opener out of my pocket at 145 mph. I found the biggest chunk and it still worked. Then I sold the bike before I got killed or arrested. I knew what would happen.

I'm older now. And slightly more mature. At least I realize I am not invincible and I don't heal as fast as I used to. I also know there is a crap-load of suicidal animals that live near me. Me on bike vs deer = we both lose.

Alcohol and gas mix
Just For Fun Off Topic
Replies 15 Post by Iowafun

Thank you for your tips on the salt-vinegar-soap for killing vegetation. I plan to use it near our backyard ponds, where we have red-eared sliders and tadpoles (not in the same ponds, of course, since the sliders will eat the tadpoles!). Back when I was living in Virginia and living on a wetlands, I was advised by the local Forestry and Wetlands Boards that Roundup was safe to use around the wetlands. However, since then I've seen reports that the inert ingredients in Roundup can affect the sexual hormones of animals that feed on the vegetation that has been sprayed, and that overspraying Roundup in water is very harmful to amphibians. See this link: http://www.pitt.edu/~biohome/Dept/Frame/Faculty/relyeaabstract.htm

controlling grass along fencing
Mowers Field and Finish
Replies 50 Post by Ramona

If the 4300 doesn't already have loader hydraulics and controls installed it's a lot more work than just 4 bolts each side.

4300 with 300x or 300cx FEL
John Deere Tractors
Replies 7 Post by kwschumm

I have a 4110 Jd with fel and rear blade and landscape rake, I am wanting more power and new, Does any one own one that can give some input on the 3320. <br>
Thanks<br>
<br>
Roger

3320 Jd any one own one yet
John Deere Tractors
Replies 1 Post by rogermo

If,you are asking me,I got mine in sw Wisconsin,near Dubuque,IA.

2005 PRICE FOR BX2230
Kubota Tractors
Replies 10 Post by jeepers94

I see the difference between the pics now. Last night I was flipping between the pics and didn't see it. Must have been late.

Boom Pole Forks and Reciever Hitch added to FEL
Loaders Back Hoes
Replies 21 Post by kwschumm

i recently purchased a ck25 gear drive with loader, bush hog, and mid mount mower. on the mmm the shaft that goes from the mid mount pto to the gearbox on the deck rubs on the left side brake line when mowing with the deck up. has anyone else run into this? if anyone has input i would appreciate it before i contact the dealer. i'm new at this tractor stuff and need all the info i can get.

mid mount mower
Kioti Tractors
Replies 1 Post by delorean1

I am trying to decide which will suit me best. I will be using the tractor for snowblowing,lawn mowing and occcasional brush cutting only. The snowblower will be a 5 ft 3 pt hitch with a hyraulic chute. My dealer quoted me about a $900. difference between the two. Considering my applications, will the larger engine make enough of a difference to justify the extra cost? It's not about the $$$, I just don't want to pay for something that I don't need. On the other hand, the extra $$$ is nothing if I am sorry I didn't opt for the larger HP. I am ready to make the purchase within the week. Any real life experience with either of these tractors would be greatly appreciated.<br>
<br>
PS - I have been a diehard Deere fan. In my opinion, their products keep getting more expensive while quality keeps going downhill. <br>
<br>
Thanks for any help.<br>
<br>
Mike<br>
<br>
Mike

2630 vs 3030
Kubota Tractors
Replies 3 Post by MikeMag

I agree about the $$$. I looked into a Kioti CK20 HST in the summer. The dealer quoted me $11,300 for the tractor and $2,550 for a FEL. This was a quote over the internet. I am sure I could easily get 10% off that. I was impressed by them, but I still have not made my decision.

Kioti tractor prices
Kioti Tractors
Replies 6 Post by nissan197

Can you please tell me what a 1997 model Kubota L2350 4wd with a LB 400 FEL is worth. The tractor has 760 hours on it and is in very good shape.

L2350 Price check
Kubota Tractors
Replies 1 Post by D Turner

here are some pics of the new models. enjoy.<br>
<br>
click on whats new on left side once your in the site.

new model pictures
Kubota Tractors
Replies 1 Post by EricBX1500

The best I can tell, the reason the price is so high is summer fuel is out of production. That and whoever the supplier is will have to blend, store and ship as needed. 15,000 gallons of gas is about like you filling up your lawn mower, to them.

Enough of that though. The reason of my post was just to relate that there is a difference between summer and winter gas. Something I didn't know.

By the way, summer blend went for $4.05 per gallon last year.

Winter Gasoline Vs Summer Gasoline
Parts and Repair
Replies 11 Post by Billy

I have read and reread many of the comments in the line of thought. Sure made me think of conversations of young bulls as to which brand of pickup was the best and how you were able to sup of this brand compared to that one. I learned something from both. If you don't like it, it will give you terrible service.

Opinion which chinese tractors is best
Jinma Farmpro Agracat Nortrac
Replies 24 Post by kthompson

Well it is that time again and I need to perform the 200 hour service on my 4410. I knew that oil prices in general had probably gone up a good bit since the 50 hour break-in service but for Pete Sakes!!!!! $49 for a 5 gallon pale of Hy-Gard Low Viscosity????? My ankles have black and blue marks on them from those prices. Last time I used Hy-Gard standard viscosity and I paid about $6 a gallon. Hy-Gard is manufactured for John Deere by Chevron so I don't think there is anything magic about Hy-Gard. <br>
<br>
I looked at some Pennzoil Hydra-Tranz oil in the 5 gallon pale for $25.95 which meets John Deere's J20D spec. but with shipping coming to $39 it was not a very good deal. <br>
<br>
I remembered that we still have some logging operations going on over on one of our tracts of land so I called the logging operation owner and he sold me 2 5 gallon pales of Shell Donax TD for $60 which is what he told me he paid for it. <br>
<br>
http://www.shell-lubricants.com/products/product_details.php?code=53004<br>
<br>
I will follow up with how well it performs after I have used it for a few hours. <br>
<br>
I just cannot see paying that much for trans. oil. Thought I would pass along this info. for other who may be considering the purchase of oils for doing their own tractor service.

John Deere HyGard vs Other brand oils
Parts and Repair
Replies 1 Post by Chief

For what a cab could do for you!

BX23 Greatest
Kubota Tractors
Replies 3 Post by Art White

With the items listed on the "to do" and if you are going into business, I'd suggest both a skid steer and a CUT. A skid steer is more rugged for some of the jobs and has the lift capacity on a loader. The CUT is more agile for finish and smaller work. To start with I'd find some used equipment. I'd put the backhoe on the CUT and purchase a tractor with loader that is quick attach and compatible with the skid steer so you can use some of the same stuff.<br>
<br>
You won't be spending all your time attaching implements and if there is more than one of you working, you're both making money.

Best compact landscaping rig
Operating and Attachments
Replies 11 Post by yooperpete

I streched out boom and dipper, also the stabilizers so everything was flat on the floor. Recheck every thing to make sure you do not have some stored energy somewhere in the system. Work "ALL" of the valves with tractor "NOT" running then un hook hoses from tractor.

Just used a small drain pan and speedy dry. Unhooking all the control linkages as I recall was the most difficult part. Can't remember why just seems like it was the headache. Maybe because of the sheet metal in the way.

Once you get the big plate off the back you have complete access.

Hydraulic valve repair-48 backhoe
John Deere Tractors
Replies 4 Post by harvey