Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

had to use it when digging my garden out. When one wheel would spin I stopped and would engage it then carry on. But somtimes I forgot to let off the lever to disengage it and would make a turn on my lawn. The inside wheel would rip the lawn up. A newbe mistake. I dont think this hurt the tractor because I was on the lawn I'm sure if I made this mistake on cement this would be a different story

Traction lock
Kubota Tractors
Replies 20 Post by EricBX1500

I recently bought a used B2400HSD with front loader. This is my first tractor, can anyone recommend what manuals should I buy and where I can purchase.

Manuals
Kubota Tractors
Replies 3 Post by pete3982

Now that is the best reason for having a dedicated permenant hook up I have heard. I can envision a extended outage with the neighbors asking for help with their freezers etc with the mobile unit.

pto generators
John Deere Tractors
Replies 12 Post by harvey

Advance auto also checks them for free.

99 service engine soon
Pickup Trucks and Trailers
Replies 17 Post by Gearhead

Can anyone tell me if there is an PTO override switch or lever on the above model. We can't seem to get it to work. Main lever right of the seat seems to move freely but no movement down back !! New slasher is just sitting there looking at me !!!<br>
<br>
Cheers<br>
Brian

Belarus 570 PTO override
Belarus
Replies 2 Post by jimbob7

Oliver,

Do you have any more information on the anti sway bars you swapped out. Made the mistake of letting a friend borrow my B7510, it came back with one bent sway bar and another broke off. I will not do that again. Where did you buy the parts?

Kubota 7510
Kubota Tractors
Replies 16 Post by nickmad

Sorry Eric. Thanks to Art for reading the post correctly.

3pt lift arm adj
Kubota Tractors
Replies 6 Post by DRankin

Towing from the draw-bar is always the safest, but that limits the ballasting options. You could use the draw-bar and a single axle trailer and load the thing heavy in the front so it has the maximum tongue weight. That would favor better traction and control.

I would ballast the rear end of the tractor as much as possible to get the tractor as close to the weight of the loaded trailer as possible.

I have seen some ballast boxes with trailer hitches. I have my Bad River hitch stacked with barbell weights. The are some photos in my pics.

trailer for a 4110 jd
Operating and Attachments
Replies 6 Post by DRankin

Where is the fuel tank located? I believe that tractor is gravity fed. You will want to prefill the filter with fuel. follow the fuel line to the injection pump. where it goes into the pump the should be a bleed screw or banjo bolt there to loosen and fuel should bleed it self off.

Ford 3910 fuel pump question
New Holland Tractors
Replies 5 Post by oneace

I would not recommend the loader blade. The Curtis is way overpriced for what you get, so as Murf indicates build your own if you need one. I sold mine for several hundred less than I paid for it after little use. I now use just the loader and rear blade.

I found several things about a loader blade I do not like. It stresses the loader arms, digs into a stone driveway like crazy, if you use the float feature very little load causes the front wheels to loose steering capability,limits your ability to push the tractor out of a hole as well as placing a great deal of weight on the loader at all times.

If you want to spend money, but a three point blower.

Is a Curtis FEL mounted snow blade worth it
Snowblowers / Snow Plows
Replies 5 Post by cutter

To lift the front end and spin the tires while watching the deiveshaft spin on both sides of the coupler going into the transmission.

Kubota L2350 4 wheel drive problem
Kubota Tractors
Replies 5 Post by Art White

If You do a search You will see there is now a fix for this. Mine goes in Friday. Thanks everyone for the great info Dan.

L2800 DT 3 point shudders
Kubota Tractors
Replies 6 Post by dwitcher

bmeyer: you mentioned that you should hava gotten wheels with your landscape rake. having never used a LR I am curious why. AC

jd2305 landscape rake
John Deere Tractors
Replies 3 Post by arctic cat

I am trying to get back to the jd owner in connecticut who had the landscape rake for sale. can't email cause his mailbox is full!

jd2305 landscape rake
John Deere Tractors
Replies 1 Post by arctic cat

There is a big viscosity difference between UDT and Super UDT.

A lot of oils meet the UDT specs. Far, far fewer meet the Super UDT specs and those that do have a significantly higher viscosity than the original.

If you have a manual transmission I think you can use other products without problems. In my experience, Kubota HST's run best when fed Super UDT.

Traveller Premium UDT SAE 10W-20
Kubota Tractors
Replies 7 Post by DRankin

yes i just recently purchased a 284 from john nelson
trustworthy yes. I saved about $3,000 buying from him as buying a nortrac from northern tool& equiptment the delevery was very reasonable it appears to be what i expected the only drawback wich i knew about at the time is that he orders them when you order them from him and it takes a couple of mos. for them to be built and shipped to him if you can deal with a bit of a wait you will save money and have a good tractor .

Nelson Equipment Corporation
Jinma Farmpro Agracat Nortrac
Replies 2 Post by rod

For rocks I often just use the 3 pt pallet forks and pallet. I just roll the rocks up on the pallet and then move it where I want. It does depend on how steep of terrain you have.

implement to carry rock or dirt 3pt
Operating and Attachments
Replies 7 Post by Peters

Look into dirt scoops. Here's a link that describes them.

before buying my 2305
John Deere Tractors
Replies 2 Post by kwschumm

I have a Kabota B2400 w/woods 6500 backhoe. On the boom piston I have to replace the rubber bumper (now a plastic sleeve) on each end. Please guide me through changing these. Their is one bolt 1"1/8 on each end under the support legs of the backhoe? I have already lowered the support legs, disconnected the pistons in order to gain access to those bolts.<br>
Thanks in advance

changing transmission fluid
Parts and Repair
Replies 5 Post by curtlt

Hi, I am new to this board and I was hoping for some opinions.<br>
I am looking at buying a B7500 with a Woods Backhoe, Kubota belly mower, Kubota loader and a Back blade for 14300. It is 3 years old with 254 hours and looks real clean. <br>
Is this a decent deal? It seems to be market rate here in the north east.<br>
<br>
I am shocked at the price of used trctors but I guess that is good for me if I ever want to get rid of it.<br>
Thanks,<br>
Lee<br>

B7500 price
Kubota Tractors
Replies 8 Post by leebo95