Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

This goes along with winter and summer air in tires.

Something for every one
Just For Fun Off Topic
Replies 13 Post by Art White

<50 Hrs, FEL w/ level indicator, 62" deck, I-match, Ballast box & 72" blade for 12k. <br>
<br>
Sound reasonable?

price check 2210
John Deere Tractors
Replies 2 Post by tnttommy

Any tips on changing the fuel filter on a Kubota 4200. New to tractors and diesels engines. Thanks

fuel filter
Kubota Tractors
Replies 10 Post by nmcapt

I had the same problem with my old B7200. The end of the crank was worn and we put a brass bushing in the end of the crank and then used the pilot bearing. It only last a year or so. I then sent an e-mail to Tractorsmart and Ronnie Bowman talked me through what to do. I ended up getting a bearing pressed into the flywheel and then had to have the input shaft cut down to fit in there. I sold it to my brother and he is still using it every week. Some friends of my dad's did the lathe work and pressing in the bearing. Shoot Ronnie an e-mail over at tractorsmart.com and he will walk you through the whole process.

B7200 Flywheel Question
Kubota Tractors
Replies 12 Post by kubotaguy

Seriously consider guage wheels as well. Yes it adds to the cost of the rake, but makes the rake so much more versitile. The 2210 dosent have position control, so you will need something to help the tines glide or skim the surface. Otherwise it will be too aggressive and dig in and probably do more harm than good...

Ducati

Landscape Rake
John Deere Tractors
Replies 12 Post by Ducati996

Please keep us posted when you figure out the problem.

John Deere JD 4115 PTO Problem
John Deere Tractors
Replies 6 Post by DRankin

Short answer, nothing is impossible, some things just seem too expensive to be practical.

I guess the real question is "What do you want to accomplish with the blade?" Do you want to move dirt, snow?

I know of several companies that make snow blades, snow blowers and power brooms for the commercial ZTR mowers, I even know a couple people who use them. They beat shovelling, but not by much.

Best of luck.

zero turn mower
Cub Cadet
Replies 3 Post by Murf

Thanks for the reply. I tend to agree with you that either the wheel had some issue from teh start or it has just had some hard days. I bought the tractor from a family member that ran a tree farm. He took care of the equipment, but was not afraid to take it to and past its limits on occassion. The real test will be to replace teh wheel and run it. I'm just glad I wasn't on a slope when it happened. Thanks again.

Broken Rim
Kioti Tractors
Replies 8 Post by clarkt

Can anyone tell me if a D750--D850- D950 will fit in a B6100HST without major mods. I dont seem to be able to find a D650 but the others are available. Thanks

B6100 blown motor
Kubota Tractors
Replies 2 Post by RetCoasty

You are so right. The Power Service Diesel Additive works great and it took care of the problem. Thanks Mr. White for your advice. Have a good day. Dan

Lost of power B7100 HST 1991
Kubota Tractors
Replies 6 Post by dannycora

I'd expect these comparisons to get pretty tricky.
For instance, does a Woods medium duty rotary cutter
really equate to a Rhino medium duty flail?
I suppose it depends on what you intend to do with the machine.
If you want a machine to cut brush up to the lower limit of the two,
maybe it really does take 30% more power
to do that task with the flail compared to the rotary.
The machine weight would be important, too.
The flail mowers I considered are heavy compared to finish mowers, not quite so heavy compared to brush cutters,
but then I don't know if the flail is usually pulled on its rollers or carried off the ground from the 3ph.

Finish Mower or Field Mower
Mowers Field and Finish
Replies 12 Post by tom21769

If it looks like new & has close to 0 hours it is a Viet tractor.

PTO
Mitsubishi
Replies 12 Post by lsheaffer

It is a grey market tractor. Email me for parts or manuals at sheaftractor at coiinc.com

FD 2650 parts
Mitsubishi
Replies 2 Post by lsheaffer

SD1500A is an updated SD1500. There is not a US cross.

Shibaura SD1500A
Shibaura
Replies 5 Post by lsheaffer

I appreciate all the complements, especially since the exterior is not done yet. Well...the interior is completely new with the exception of the factory installed carpet the lines everything and is glued in place. But realistically, very low hours and it cleaned up like new.<br>
<br>
The canvas is new (ouch), but I hired that done. All the components that wear have been replaced or repaired. Pumps, hoses, blowers, wires, batteries (4) as well as all of the electronics. I need a radar arch or tower, have the radar but no place to put it yet.<br>
<br>
Best part is, no mortgage payment. But the first mate is already talking about how nice a larger one would be. I told her she would either be heeling over or doing 60 knots in one of Murf's specials. I prefer the heeling, it's free!<br>
<br>
Oh...I almost forgot. I spent more hours than I care to remember on my back scraping and sanding. Removed hard bottom paint, sanded, repaired nicks and blemishes, barrier coat (yuk, what a job) and finally VC-17.

Finally IN The H2O
Just For Fun Off Topic
Replies 12 Post by cutter

It's not clear what you intend to do with the machine. "Ploughing up pasture" implies yo me that you intend to do some cropping? If so you will need a machine bigger than 50hp, if however you just want to bush hog the pasture and "maintain" the woods then a 40 to 50 hp machine would be fine. Please be more specific with your intended use of the land, will you be bailing hay, planting beans etc.

How big a tractor to farm 20 acres
Operating and Attachments
Replies 17 Post by AnnBrush

I would go for the idustrial. WE have them. They will not rip up grass while mowing. You get great traction too.

Industrial or Turf
Parts and Repair
Replies 9 Post by tw-20ford

We have a 29d but it seems like you need bigger. I would see you go with a 40d fwa. Make sure you get idustrial tires. good luck, robb

new tractor purchase - size question - terrain and use
New Holland Tractors
Replies 8 Post by tw-20ford

General rule of thumb when you do not have spec is to turn each cyl. to top of compression stroke and adjust till push rods get slight tension while turning with fingers.

Tappets adjustment
Kubota Tractors
Replies 4 Post by oneace

You could get a Woods loader or some other after market one but the factory loader will be hard to find. Yes they have a rear and mid PTO with a 3pt hitch. They are generally good tractors as long as they were taken care of.

b6100
Kubota Tractors
Replies 2 Post by oneace