Tractorpoint Login

print < Tractorpoint Login

Search for = dAb

Topic

I had the same problem with my XUV 850D. I am putting together a class action suit against John Deere for not notifing consumers about the problem. Anyone intersted in getting some or all of their money back regarding the belt slipping on the JD diesel Gator? Email me. The diesel version of the Gator does not have a protective shroud that is on all other units and JD refused to fix mine Please contact me @ dwdaboll1117@yahoo.com

Clutch or belt
Utility Vehicles UTV/ATV
Replies 10 Post by dwdaboll

Dennis,
You are correct if I sold, serviced,repaired every tractor and implement line Item you listed that would be correct,now lets see how much volume you have in Chinese tractors, ?? Hmmmmm we might be a little closer together on the X line.No question about the fact you have a great web site ,but so do I and If my posts were in all the other sections of your site I could see where I was taking advantage of it,you posted a list of my post's right ? what section were they posted at ? It's your site to run however you see fit,you stated in a earlier post that you started this site to Help tractor owners? I don't think you lost site of that did you ? That is what I do in turn for that help, I have the hope of selling some parts with a link to my webpage,I don't need this site to survive,I'm not spamming all the sections of this board,it's over and done lets shake hands and go on down the road.

Tommy

Hydraulic steering line
Jinma Farmpro Agracat Nortrac
Replies 34 Post by affordable

We have the manual in hard copy,but not electronic

Tommy
Affordable Tractor Sales

PDF Manual JM-180 or JM-200
Jinma Farmpro Agracat Nortrac
Replies 2 Post by affordable

Speaking of Model airplanes,I have a few that I want to get rid of,2- of them are Piper Cubs, 1- has a horizonal
twin cylinder engine,

Tommy

Rear Axle Lock Unlock
Jinma Farmpro Agracat Nortrac
Replies 23 Post by affordable

affordable has posted a new photo.

Subject: Building.

Description: <br>Affordable Tractor Sales

Building - New Pix by affordable
Photos
Replies 1 Post by affordable

affordable has posted a new photo.

Subject: Jinma Pic.

Description: <br>Affordable Tractor Sales

Jinma Pic - New Pix by affordable
Photos
Replies 1 Post by affordable

Not sure ?, I'm sure I can but don't think I ever have one
that I know of

Tommy

Jinma 284 Blows Fuses When Starting
Jinma Farmpro Agracat Nortrac
Replies 11 Post by affordable

I understand that you do not want Advertising on this site with out getting paid for it,I listed my Website address that's all in the post,The chinese tractor owners need more help than the typical Big 3 owners, they also need a source for tech. info and parts that is a little harder to come by than the more common brands.

Tommy
Affordable Tractor Sales

agracat
Jinma Farmpro Agracat Nortrac
Replies 23 Post by affordable

Yes we have the solenoids,sorry for the late response,I don't check this board as much as some of the others.<br>
<br>
We should have any parts you will every need for your tractor,it's the same as the Jinma 200 series<br>
<br>
Thanks<br>
Tommy<br>
<br>
<br>
<br>
Moderator edited to remove the advertising content.

Farm pro 2420 solenoid
Jinma Farmpro Agracat Nortrac
Replies 4 Post by affordable

On the backside of the loader valve are 2-caps with 2- screws in each one, remove the 2-screws and confirm that everything is tight underneath them, if it is I would look at the relief valve on your loader valve.

Tommy
Affordable Tractor Sales

Jinma 224 Loader does not lift or tilt
Jinma Farmpro Agracat Nortrac
Replies 23 Post by affordable

Does your tractor have power steering ? Is the steering working ok ? If it is the hydraulic pump is working,it could be a couple of different things causing your problems,the lift valve or the piston in the lift box.I have a feeling it's your valve if your power steering is working.You can give us a call 979-865-4002 and we will try to help you solve this problem

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"

3 point wont lift
Jinma Farmpro Agracat Nortrac
Replies 9 Post by affordable

Hi, anyone know where I can get the pressure injector line for my S100?

Injector line for S100
Shibaura
Replies 2 Post by dabowhunter

I love fishing in Canada, Walleye and Pike.

Tommy
Affordable Tractor Sales

Agracat 2920 RF axel wheel
Jinma Farmpro Agracat Nortrac
Replies 19 Post by affordable

Sounds like the shift lump jumped out of the spline sleeve or broke,do you have a parts book ?

www.affordabletractorsalesco.com

Tommy
Affordable Tractor Sales

PTO
Jinma Farmpro Agracat Nortrac
Replies 12 Post by affordable

We have one of the largest Jinma parts supplies in the USA,check our website or give us a call.
www.affordabletractorsalesco.com

Tommy

Fuel Line Problem
Jinma Farmpro Agracat Nortrac
Replies 7 Post by affordable

Check your bulb sockets at the rear of the tractor,

Tommy
Affordable Tractor Sales

turn signals and four way flashers
Jinma Farmpro Agracat Nortrac
Replies 8 Post by affordable

Tony,we do not have crank kits but we do have all the parts you will need.Let me know if we can help

Tommy
Affordable Tractor Sales
979-865-4002

Y385 Engine rebuild kits
Jinma Farmpro Agracat Nortrac
Replies 4 Post by affordable

What part do you need ,we keep some and have a source for more

Tommy
Affordable Tractor Sales
979-865-4002

Jinma backhoe parts
Jinma Farmpro Agracat Nortrac
Replies 3 Post by affordable

Yes I have IDed the controls , it does have the foot throttle.. Any help in the correct ""FORMULA"" to run the tractor with a Grass cutter. I can get the PTO to turn in several speeds but the tractor only creeps. Also what the DROPING and Raising of the implement. There is a large lever to the right side outer that raises and lowers but then there is a smaler lever on the inside that I have no clue as well as a HEEL pedal on the Right foot deck- again no clue and a lever on the Left aft of the lever for the Medium, Low and High gear in the center left of the gear shift. Thanks for the Help..

Hinomoto E322 manual
Hinomoto
Replies 6 Post by daboodog

We have been selling the Jinma chippers for years with little or no problems.The only problem with them has been the feed knuckle ($18.00) or the feed belt ( $14.00)So if you can save $ 2,000-3,000 dollars and replace these parts if they broke? That would still be a bargain.We have some customers that have done nothing but run them.If you want to buy a competitive 6" woodchipper witha feed roller for $ 1,600.00 plus shipping look hard at the Jinmas.We also keep all the replacement parts in stock .

Tommy
Affordable Tractor Sales
Bellville,Texas 77418

Anyone use a Jinma chipper
Jinma Farmpro Agracat Nortrac
Replies 31 Post by affordable