Tractorpoint Login

print < Tractorpoint Login

Search for = backhoe

Topic

This sounds like a "load check" problem. Backhoe valves usually have one load check per spool, so you can use two or more functions at once and not drop. I pulled up the 1050 manual on the link below. Page shows a little bitty picture of item 3 that says it's a check valve and takes 6 per backhoe. It goes in the back side of the valve, so you probably have to unbolt the valve from the backhoe. If you put the bucket and stabilizers down, you may be able to do that without taking everything apart. Just make sure to relieve pressure on everything. Unscrew the check on the boom section and look for a broken poppet, or cracked seat. I'm betting on the cracked seat, so the poppet can't close off the passage. Will probably take a new valve section to fix.

problem with 1050 woods backhoe
Loaders Back Hoes
Replies 22 Post by mrbackhoe

The Woods 1050 is a pretty powerful hoe. Friend of mine has one on a JD 4240, which is 110 pto hp. It's a pretty good match for that tractor. I can't imagine you putting it on the 3-point of an L48. If you have any kind of bigger tractor you'd be better off. My guess is that the backhoe will be too much weight on the hitch.

Woods 1050 backhoe on Kubota L48
Loaders Back Hoes
Replies 5 Post by mrbackhoe

Woods is another manufacturer that makes skid steer quick attaches for older Kubota loaders. I thought about adding their quick attach and new buckets on my last Kubota, but when I looked at the cost of a new cab tractor with Woods FEL and BH, I traded the whole package down the road.

Help with fel attachments
Operating and Attachments
Replies 10 Post by mrbackhoe

I agree with Murf. If you can find a small used loader from one of the "shortline" brands, they can probably get you the a new mounting kit to fit your tractor like a new one for a lot less money. I've looked at used compact tractors that are totally worn out, but the loader is so simple it's still in good shape.

Ford 1310 FEL
Loaders Back Hoes
Replies 5 Post by mrbackhoe

Ford 4630 is pretty heavy, so it should handle a 3-point backhoe. Some tractors need a special bracket to make the top link attachment rigid. I think the 4630 has draft control and I've run a backhoe that bounced because the top link moved. You may want to consider a major brand like Woods that should have all the stuff you need.

backhoe subframe
Loaders Back Hoes
Replies 3 Post by mrbackhoe

I've got a Woods loader on my L4630. It's got the skid steer quick attach to switch between bucket, bale spear and pallet fork. Works great and cost me less than the Kubota loader!

woods loader on kubota l4300 trouble need help
Loaders Back Hoes
Replies 6 Post by mrbackhoe

Woods makes lots of frame mounts for compact tractors. I looked up a mounting kit manual for yours and the link is below. Looks like they only put on the 7' and 8' models. Mine is the new 9' with thumb and it works great!

woods ground breaker hoe
Loaders Back Hoes
Replies 3 Post by mistrbackhoe

Woods has the nice little BH6000 backhoe for the subcompact tractors. They also have a little 4.5" chipper that's made for subcompacts. Check them out if you're still looking.

Need Advise on chipper and backhoe implements that works with a 2210
John Deere Tractors
Replies 6 Post by mistrbackhoe

I just joined, so you may have already bought the backhoe. I have a Woods BH90X and it's rock solid for a better price. I would think there smaller units would be good, too. (Woods is sort of the first name in small backhoes.) If you don't need the extra dig depth, you might want to get the smaller model. Spend the money on the thumb - it's great for picking up odd stuff like concrete chunks.

Backhoe for Kubota B3030
Kubota Tractors
Replies 3 Post by mistrbackhoe

dealer found some wires pulled loose.also had to replace one of the potentiometers.had to recalibrate the computer labor was $625.00.thanks for the seat switch advice.maybe i can save another trip to dealer.i dont want them to retire early just because of me.thanks again!

John Deere JD 4115 PTO Problem
John Deere Tractors
Replies 6 Post by backhoes

im sorry youre having this problem,this has been a real pain for me.dealer charged $822.00 to fix this and i still dont know exactly what they did .this is a great tractor but has way too much electronics.theres basically nothing you can do except send it to dealer and hold your breath.i love my tractor but am growing tired of these damn little quirks

John Deere JD 4410 ehydro fault code 10 reverse coil
John Deere Tractors
Replies 2 Post by backhoes

thanks for responding,tractor is still at dealer hooked to the computer,theres alot of head scratching going on,i will definately install skid plate because i dont want to go through this again

John Deere JD 4310 no forward or reverse
John Deere Tractors
Replies 5 Post by backhoes

my 4310 has been in the dealership for a week,they have had the computer hooked to it directly to tech service ,still no answers but they say it is computer related,hope to know soon

4310 no forward gear
John Deere Tractors
Replies 12 Post by backhoes