Tractorpoint Login

print < Tractorpoint Login

Search for = Sallyd

Topic

Again, thanks !! Will try, too hot to finish bushogging, whew...

Kubota L275 finishing mower needed
Mowers Field and Finish
Replies 5 Post by Sallyd

I replaced mine with a Optima 34/78 marine battery. I have a winch and jumper cables that I run off of the studs. I removed the stock battery stop and welded a new stop back a little bit closer to the radiator. I used a piece of 1" angle iron across the top of the battery with 9" bolts to hold it down. Two years now with no corrosion or movement. Starts in all temps, -25 anyways. Runs the winch very well. Good thread. Thanks.<br>
Edit: I have a sync-reverser tractor so I dont have a cooler, just a radiator. I had enough room to do this, With a cooler you may not.

Possible Solution To The 4000 Ten Series Battery Corrosion Problem
John Deere Tractors
Replies 87 Post by sallydanger