Tractorpoint Login

print < Tractorpoint Login

Search for = H. PETERSON

Topic

I RECIEVED A BALLAST BOX WITH MY 419 LOADER FOR MY 790. MY DEALER SAID IT WAS INCLUDED IN THE LOADER SET UP!!! IT HAS THE "I MATCH" LOGO ON IT BUT IT HOOKS TO THE TWO LOWER ARMS AND THE TOP LINK WITH NO PROBLEM. AN IT ALSO LISTS AN EXTENSION THAT IS ADVAILABLE.<br>
MY JD MANUEL STATES THE APPROXIMATE WEIGHT FOR THE FOLLOWING MEDIUMS.<br>
SAND KG/(LB) 240(528) WITH EXTENSION 80(176) TOTAL363.6(800)<br>
CONCRETE 314(692) 104(230) 461.6(1018)<br>
PORTLAND CEMENT 420(926) 140(308) 603.6(1330)

ballast box
Operating and Attachments
Replies 12 Post by H. PETERSON

ANY ONE HAVING FILTER PROBLEMS CAN GO TO THE AMSOIL WEB PAGE AT (INTERSHOP.AMSOIL.COM)TO DO EITHER A AMSOIL OR HASTINGS FILTER APPLICATION LOOK UP PAGE!!!!!! FOUND FILTERS FOR MY 790 UNDER (YANMAR)

Oil Filters
Yanmar Tractors
Replies 22 Post by H. PETERSON

My 2002 790 does not have wingnuts securing the primary or secondary air filters. The air filters have a built in silicone gaskets that push on and are locked in place by the top housing. It appears that JD has been reading these posts!!!!

JD 790 Air Filter
John Deere Tractors
Replies 12 Post by H. PETERSON

I have the 419 fel and love it with the svt joy stick comfortly by your right thigh and the safty lock that can lock out roll or vert modes any one that has used a fork lift for many hours ie (job) will like it.plus I am looking into a set of forks for it soon.Plus the 419 is easy to take off the machine leaving the svt/joystick on the machine<br>
does anyone have a set of jd 790 filter cross ref for:<br>
oil filter<br>
power stearing<br>
and a equivlent for jd20d hy-guard hydraulic fluid.<br>
p.s. JD must have been reading this board,my 2002 790 has silicone molded base gaskets on the primary and secondary air filters,the housinglocks them into place(no more broken plastic wing nuts),HOWEVER you need fingers of an octopus to secure the latch neer the radiator screen it was not meant for someone with 13.5 ring fingers.

JD 790 or NH TC29
John Deere Tractors
Replies 13 Post by H. PETERSON

THATS A GOOD PRICE BUT MAKE SURE HE THROWS IN THE MID PTO AND HAVE THE TIRES TUBED AND LOADED,I LOVE THE 419 FEL IM GOING TO BUY THE FORKS SOON!!!! AS FAR AS THE BRAKES ARE CONSERNED, I DROVE BIG TRUCKS FOR A WHILE,AS LONG AS YOU USE THE RIGHT GEAR,ENGINE SPEED THERE SHOULD NOT BE A PROBLEM.
REMEMBER SEMI'S DO NOT HAVE WET BRAKES AND MOST STILL USE DRUMS.!!!!!!!

jd 790 price
John Deere Tractors
Replies 6 Post by H. PETERSON

THANK YOU ALL !!!!! YOUR COMMENTS HELPED ME IN MY CHOICE ON THE BRAND,MODEL AND OPTIONS !!!! PLUS THE J.D. DEALER IN ONEONTA,NY(SHAWN) WAS NOT ONLY HELPFULL BUT MADE IT A PLEASURE TO WORK WITH. 100'S OF PHONE CALLS LATER, HE HAS THE PATIENCE OF A SAINT!!!!
I 'M BUILDING A HOME, I INFORMED HIM THAT THE MACHINE I NEEDED WOULD BE DIGGING A TOTAL OF 1000 FT OF DITCH. FOR POWER,WATER,CABLE AND TELEPHONE LINES ON 3 ACRES, PLUS ROCK RAKING,PLUS ROCK RAKING AND MORE ROCK RAKING...THEN COMES THE YORK RAKING, SEEDING AND MOWING, MOWING, MOWING. I'M A HOMEOWNER AND I WAS TREATED LIKE A MEMBER OF THE FARMING COMMUNITY WHO SPENDS $$$$$$$$$ IN A LIFETIME, WHEN THIS TRACTOR WILL BE GIVEN TO MY KIDS. LIKE THE OL' JD EVERYONE RELIES ON. THANX TO Y"ALL H. PETERSON

JUST RECIEVED MY 790 4WD REAR MID PTO 419 LOADER 7 SERIES HOE
John Deere Tractors
Replies 8 Post by H. PETERSON