Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I am trying to remove the drag rod that is bent. I removed the cotter pin and nuts at both ends. I cannot remove the rod itself. I tried tapping it and it just does not move. Does anyone know how I can remove it?

Removal of steering drag rod on Yanmar 1500D
Yanmar Tractors
Replies 4 Post by wjsobolewski

The steering seems to be OK. I am trying to retore it to original mint condition. I have bought a few items to take it in that direction....It appears to be a good operating machine..easy to start, etc.

Steering tie rod
Yanmar Tractors
Replies 4 Post by wjsobolewski

Try best.used.tractors. com, Murray Publishers, or Hoye tractors. Bill S

john deere 950 manual
Garden Tractors
Replies 2 Post by wjsobolewski

Shirley; Go to best.used.tractors.com. You can probably get manuals from them. I am in the process of getting a Yanmar manual from them. Also try Murray Publishers and Hoye tractors. Bill S

need manuals
Mitsubishi
Replies 2 Post by wjsobolewski

Frank: This is the best I can describe the fuse. If you go to www.Hoyetractor.com, you will see the type of 5, 10, and 15 amp fuses that I need. Look under YM 1500D, chassis parts, electrical. Part 49 is a 15 amp fuse. I contacted Hoye Tractors. They only have 15 amp as pictured. They do not carry the 5 and 10 amp fuses. I need 5, 10, and 15 amp fuses. Thank for you help. Bill S

5 10 1nd 15 amp wire fuses
Yanmar Tractors
Replies 6 Post by wjsobolewski

Justus: Thanks for your help. I never heard of a wire fuse. As I indicated I did find a 30 amp fuse that was spiced into a wire. Now I need to look carefully at the wire fuses to see if any are burned out.....the horn and turn signals do not work...I can only assume a wire fuse is burned out. Thanks again. Bill S

Fuse box
Yanmar Tractors
Replies 10 Post by wjsobolewski

In June, I bought a "gray" Yanmar 1500D tractor. Though the electrical diagram shows a fuse box containing a 5A, 2 -10 A, and a 15 A fuse, the tractor does not have a fuse box. I can only find a 30A inline fuse. This fuse of which is OK. At the same time, the previous owner installed a small push switch. I put in a new push switch. I do not even know what it is used for. The turn signals do not work. I am unable find the cause of the turn signals not to work. Also the horn does not work. The front lights work OK. Does anyone with a 1500D know how I should tackle this problem regarding the turn signals, what the push switch would be used for, and why the horn does not work.

YM1500D wiring
Yanmar Tractors
Replies 6 Post by wjsobolewski

Thanks. I ordered the seal but maybe I should order the seal collar and just replace both...Thanks Bill S

Replacing seals in right axial of Yanmar 1500D
Yanmar Tractors
Replies 3 Post by wjsobolewski