Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

My B6000 injector pump is leaking badly, so I'm ordering a new one. I would appreciate hearing from anyone that can tell me things to look out for when I remove the old one. I won't to be able to install the new one without creating a whole bunch of new issues. Not planning to remove the OEM shim under the pump, so timing should remain okay. Just wondering if there is anything else to watch out for. Thanks

Kubota B6000 How to replace injector pump
Kubota Tractors
Replies 1 Post by vettman

Has anyone adapted/replaced the OEM oil bath filter with a "dry-type" air filter? I need to replace the OEM cup and retainer ring on my B6000. Thanks<br>

Kubota B6000 air filter alternatives
Kubota Tractors
Replies 4 Post by vettman

Thanks Hardwood; I'm familiar with this issue re. tire diameters on 4WD tractors, but since the fronts and rears on this tractor do not wear(lose tread depth) at the same rate, I never considered it to be very much of a problem, and after 32 years, it appears that it hasn't been. However, it also doesn't mean that something won't break tomorrow--knock wood. LOL

B6000 wheel nut torque values
Kubota Tractors
Replies 9 Post by vettman

I need to replace the black plastic dash surround on my G1900. Actual part to be replaced is called a "visor". Question: How do I remove the ignition switch? It has to come off before the visor can be removed. Will I need to use a steering wheel puller to remove the steering wheel, which must be removed also. Thanks for any assistance anyone may be able to offer.

G1900 mower
Kubota Tractors
Replies 1 Post by vettman

I'm in western Fairfax Co. Byrd Tractor in Manassas (where I bought it) will take it on a trade, but trading is not as good a deal as selling on my own--same as with used cars. Better to sell it, and apply the proceeds to the new unit.

Selling my G1900
Kubota Tractors
Replies 9 Post by vettman

David... Where's a good place to purchase Delvac 1; I've heard good reports on this oil from others, too.
John

Mobil 1
Kubota Tractors
Replies 12 Post by vettman

After 27 yrs. of service, my 4-wheel drive B6000 needs a clutch. Dealer here in Northern VA wants $800+ for the job. I realize the tractor case has to be split in order to access the clutch, but doesn't $800 seem a little high? Has anyone out there done a clutch replacement on their own? Does anyone have a shop manual that describes the process? I have the owner's manual, parts list, etc., but no repair manual. I'm sure I have all the tools needed to do this, but I would not want to start the job without some instructions. I've replaced clutches in cars, so am somewhat familiar with what has to be done. All comments, suggestions, recommendations appreciated.

B6000 clutch
Kubota Tractors
Replies 3 Post by vettman