Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I am trying to figure out the shifter on this tractor. In the Belarus 250 owners manual it shows a shifter with three legs on each side. On my particular tractor there are six spots. So far I have figured out lower left is a high gear, lower right is probably 2nd gear, middle right is extreme low range and it only works in forward. Middle left is probably 3rd or 4th. The top 2 positions don't engage so far. The picture in the manual shows II for upper left and I for upper right. The middle right shows 4/3, middle left shows 2 (3om) and 1(3om), lower left shows 6/5 and lastly lower right says 2/1.<br>
<br>
The manual says 8 forward speeds and 6 for reverse. There is an L shaped metal bracket that covers up the middle right position which is granny low or whatever. <br>
<br>
A weird thing happens when selecting the upper portions, nothing happens, then when you go back to the other gears it wont move until you put the shifter into the upper right position and then back down. Nonetheless I am thoroughly confused by this setup. If anyone experienced with these can shed some light it would be much appreciated.<br>
<br>
Do the upper two select in between high and low? It seems very odd that you would have to select your high low with the same shifter as when you shift.

Leda T30a Belarus shifter questions
Belarus
Replies 2 Post by tractah

Does it start right back up after stalling out? If not, crack the fuel lines to the inj. pump and crank the engine. See if air is coming out. Mine had a fuel line that was sucking air causing it to stall out. Good luck.

belarus 400 shuts down after running
Belarus
Replies 5 Post by tractah

OK, the supply line from the tank had a hole in it so it was sucking air. I replaced the supply lines and its running OK now. However, I couldnt get it to move. So I got scared and thought the clutch was bad. But after fidding with the F-R lever and the gears it finally moved. Im off to pickup some Hydraulic fluid now.

Leda T30a starting issues
Belarus
Replies 7 Post by tractah

Hi, great pictures. How many hours were on your engine when you rebuilt it? Did you replace the cylinders or do anything to them?

Belarus 250as blowby
Belarus
Replies 8 Post by tractah