Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Seems that shibaura uses a postive ground wiring. The electronics in the lift assembly-board on the fender evidently had a part go bad. I had to bypass the board completely. Seems that the solenoid has external valves that you can press to see if the problem is electric or hydraulic. Found a good mechanic in Milroy IN for Greys that was a big help.

lift problems solved
Shibaura
Replies 2 Post by tbarrick

You just need to register to see the rest. At least that is how it works for me.

timmyb

Filter numbers for Shib 1540
Shibaura
Replies 6 Post by tbarrick

It was already down when it stopped. Yes, I checked it and it was ok.

3 pt lift problem
Website Operations Howto
Replies 3 Post by tbarrick

I have a 1540 that I am having issues with the 3 pt. Have you had any problems? I love my machine!!!

1540 not 1530
Shibaura
Replies 2 Post by tbarrick

I was plowing snow with my Shibaura 1540 with the fender mount electric control panel when I went to lift the blade and it went no where. I have tried to narrow it down to an electrical problem to no avail. I have surmised that it is a problem with the hydraulic solonoid/valve/ whatever is on the side of the rear end under the seat. It has 2 pair of wires to control up and down. My question is...is this part something that normally malfunctions? Is it easily replaced? Is there something else I should check? Fluid level is good. I have another pair of hydraulic outlets run by the console that function fine. Any help would be great.

3pt lift hydraulics stopped working
Operating and Attachments
Replies 2 Post by tbarrick