Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Greg is right on in his advice I stock all of these manuals. Also you could just call with any questions and I will be glad to answer. google me at r&r farm equipment Inc Jonesboro ar 72404 thanks Josh......

2003 Farm Pro front differenial
Jinma Farmpro Agracat Nortrac
Replies 7 Post by rrjosh

The fuel sender on this tractor is finicky. You can bend the float mount to read the proper levels. If it is already floating at correct levels for full and empty you need to check the wound copper wires that are on the bottom of the sender. These wires are engaged by the finger that increases or decreases the signal as it moves up and down on these wound wires. Make sure it is making contact from top to bottom. If not some clever bending can solve this. If it is then you may need a new sender unit. I would be glad to sell you one or answer any questions you may have. Google r&r farm equipment Inc Jonesboro ar 72404. That should give you my number. Thanks josh

gas gauge
Jinma Farmpro Agracat Nortrac
Replies 12 Post by rrjosh

I import this mower and stock a full line of parts would be glad to help with any problems you may have. I don't think I can put info on here so google me at r&r farm equipment Inc Jonesboro ar 72404 please give me a call you will find we are very reasonably priced and eager to help. Thanks Josh

JM Finish Motor
Jinma Farmpro Agracat Nortrac
Replies 15 Post by rrjosh

I have new pumps for sale. You may not need a new pump though most are pretty easy to work on for the Chinese tractors. Just google r&r farm equipment jonesboro ar 72404 it should give you my number ask for Josh.

fuel pump ty290
Jinma Farmpro Agracat Nortrac
Replies 3 Post by rrjosh

I have manuals for this tractor. We are a dealer for them and would be glad to help with any questions you may have. Google r&r farm equipment Inc Jonesboro ar 72404 ask for josh

foton 404 euroleopard
Jinma Farmpro Agracat Nortrac
Replies 9 Post by rrjosh

Fuel wont come out of the top of the injection pump if you trying to bleed the system with hand pump. It only should come out at these steel lines when turning the engine over with the starter." Those injector fittings" should be tightened down and left alone. What is the problem? Tractor won't start? Did it just die? Are you getting smoke? If you are using the starter to tuen it over and still not getting fuel at these steel lines. Then the rack in the pump is stuck or kill cable that moves this rack is stuck in the kill position. Keep us posted

404 foton
Jinma Farmpro Agracat Nortrac
Replies 6 Post by rrjosh