Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

fmswampfox<br>
<br>
Remove the idle and main mixture adjusting screws. <br>
<br>
The idle screw is knurled and smaller in size with a pointed tip. Install it in the left hand screw hole. Screw it in lightly until it bottoms out and then unscrew it 1 1/2 turns.<br>
<br>
The main screw should be the one with the larger screw head and have a blunt tip. It goes in the right hand screw hole. Screw it in lightly until it bottoms out and then unscrew it 1 1/2 turns.<br>
<br>
When you rebuilt the carb did you replace the o-rings behind the mixture adjusting screws? If they are worn or cracked the engine will draw air in through them and run lean.<br>
<br>
The engine should start and run if all else is good. Warm it up and perform the final idle and main mixture adjustments.<br>
<br>
<br>
Ronald

6hp Techumseh need governor carb linkage and spring locations
Shop Tools
Replies 4 Post by ronald1357