Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I'm looking at purchasing a Ford 1100 diesel 4WD, and the dealer has a couple of implements which came from a 1210 which he suggests will also fit the 1100. They are a Ford 702A 54" hydraulic blade, and a Ford 716 50" two-stage snowblower.<br>
<br>
Can anyone tell me if these implements will interchange with the 1100, and what implements (and model numbers) were originally made to fit the 1100? <br>
<br>
Thanks!

Ford 1100 - implement compatibility - Ford 702A blade 716 snowblower
New Holland Tractors
Replies 9 Post by rmesser

Looking at a later production JD 655 with 4WD, 60 loader and GP bucket, belly-mount 50" mower, and front-mount 47" two-stage snowblower. Also has Landpride landscape rake. Unit has under 550 hours, and is in good cosmetic and mechanical shape. <br>
<br>
Engine starts and runs well, no excessive smoke or vibration, and hydro trans and trans ranges appear to work normally with no vibration, whine or other problems. Hydraulics function crisply, and no obvious weeping or leaks. <br>
<br>
Owner is asking $10,500 with manuals, attachments and spare parts. <br>
<br>
Asking price too high/on point? This unit is in New England, and JD's seem to bring good prices here. Thanks!

JD 655 - value for price
John Deere Tractors
Replies 1 Post by rmesser

Can anyone tell me if attachments made for a JD 755 will interchange/fit with a JD 655 - in particular a hydraulic angle/lift blade, and a front-mounted 47 two-stage snowblower? <br>
<br>
Are the mounting frames and other dimensions of the two tractors the same?<br>
<br>
I have a JD655, and found a number of implements made for a 755 which I'd buy if I could be assured they'd fit the 655.<br>
<br>
Also, would anyone have a listing of the attachments made for a 655 with the John Deere model numbers and wholegoods ID number handy? <br>
<br>
Thanks!

John Deere 655 - interchangeability of 755 attachments
John Deere Tractors
Replies 1 Post by rmesser

Looking for someone to confirm for me that the older Deere '55 series compact (655/755/855/955) used the 70 and 70A loaders. These seem to be pretty much interchangeable, yes?<br>
<br>
Can someone supply the lift capacity of these loaders, and are there any useful differences between the 70 and the 70A? <br>
<br>
Thanks!

JD loader for the 55 series - M70 70A
John Deere Tractors
Replies 2 Post by rmesser

Need to get some input on the size of rototiller that a BX1500 can handle for some light gardening and lawn reno tasks.<br>
<br>
Can a 1500 handle the Kubota B40C (37"), or a Howard HR4-88 (33"), HR4-105 (41") or HR4-125 (49") in light, sandy loam?<br>
<br>
Recommendations from any BX1500 or BX1800 users/owners?<br>
<br>
Thanks!

BX1500
Kubota Tractors
Replies 4 Post by rmesser

Murf,

Thanks for the reply, that's helpful. Every little bit of data adds up.

Regards.

Kubota L185DT specs
Kubota Tractors
Replies 3 Post by rmesser

Willie,

A 4/5 ton trailer in this configuration is what you were recommending, correct?

Two 3500 pound axles, proper frame, proper hitch for loading, good ramps, low trailer height, electric brakes.

Any suggestions on dual ramps vs. mesh gate?

Thanks.

Kubota L185DT weight
Kubota Tractors
Replies 6 Post by rmesser

Sorry, I neglected to post the hours on this unit - by the meter, it reads 670.5 hours. I have no reason to believe the meter is off/disconnected.

Kubota 7200 - market value
Kubota Tractors
Replies 8 Post by rmesser

Can someone supply me with the Deere model numbers and/or 'whole goods part numbers' for the front-mounted, two-stage snowblower and mounting frame used for the older Yanmar/John Deere 650 models? Believe this was a 47-54" wide, two-stage unit, similar to that used on 400 series lawn and garden tractors.

Found a very nice, low-hour 650 for sale, but in my area I need a blower for winter snow. Hoping to find one used to match up with this tractor.

Thanks in advance!

JD650 - what was model number of Deere front-mount snowblower
John Deere Tractors
Replies 7 Post by rmesser

Can anybody tell me if the older Yanmar-based JD 650/750/850/950 tractors are still supported by JD as to major parts? Looking for some replacement tinwork for both my Dad's 950 (hood assembly) and my 650 (fenders).

Still going to be orderable via JD, or am I going to be scouring scrapyards? If the latter, any good URL's or links to yards that may specialize on the JD compact diesels?

Thanks for input?

JD 650 - replacement tinwork
John Deere Tractors
Replies 4 Post by rmesser

Looking at a used JD 650 4WD with about 1100 hours. Appears to be in good shape (from visual inspection), with usual small wear-and-tear items appropriate to age. Comes with 4WD, three-point hitch, JD 365 power-angle front blade. No power steering, ROPS, SCV in place.

I'd like to mount a 48" tiller and a Woods RM48 mower on this unit, and will use the 365 for snowplowing a 100' driveway. Sufficient power for this?

Any particular faults of the 650 I should look out for when testing the tractor, and when considering final price? Are parts, like wheel rims and tinwork, still available from Deere? I would like to have a set of R4's mounted on spare rims for dirt work, and put turf tires on for general mowing.

Dealer is asking $4500 for this unit at present. Fair price?

Used John Deere 650
John Deere Tractors
Replies 6 Post by rmesser