Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Do not even think about the rear mount, ita pain in the butt to use. I have one (woods 84") and was planning to mount it on the from and driving it with a hydr. motor. Better still< at leat for me was the Kubota 900 with a closed cab, heater, and power angled blade. Here in mid Maryland it seems to work well. I guess some day I will convert the snow blower to work on the front but not sure if I will ever need it.

Front End Snowblower vs 3 PH Rear Mounted Snowblower
Snowblowers / Snow Plows
Replies 18 Post by regniflow

I have an older tractor that does not have a quick release. I fabricated longer tapered bucket pins to aid me in taking the bucket off. That said, I have bought a quick release unit that is used on a skid loader. They will make them for any unit. Once I install it I will just weld the adapter plate on to my existing bucket. I would then be able to also use skid loader implements. I am dragging my feet on getting this thing done, but will soon get on it.

Loader Hooking Up and Unhooking
Loaders Back Hoes
Replies 20 Post by regniflow

I weld three hooks across the back of my loader bucket for lifting. By doing that you could get a large steel beam that would fit you application and use chains to secure it to the bucket. The hooks are great for picking up heavy implements, I catch the machine over the front of the bucket and chain it at the top to one of the hooks.(usually the center one)

LOOKING FOR IDEAS TO SOLVE PROBLEM
Loaders Back Hoes
Replies 16 Post by regniflow

I have a ford 1900 with the 7 series hoe. I was told to get a frame or risk the rear case bolts breaking. Woods did not make the frame for mine any longer and I modified it to work on my tractor. The frame works well , it transmit part of the weight and load to an upward push on the front end of the tractor. My bolts on the top link are much larger than the bolts on the case. The bolts on the case are torqued a lot higher than the ones on the lift in order to maximize their holding power and would guess the shock of moving the hoe ie... legs up really puts the hurt on a straight 3-pt arrangement.

Backhoes and breaking frames
Loaders Back Hoes
Replies 48 Post by regniflow

I have been using ultraseal for over a year in my rincon, kubota 900, trailers and ford tractors. Also in my kubota z21. Get the pump for putting it in under pressure, also some extra valve cores. If for some reason you stop up a core, forget trying to use it again. Nothing has leaked and have been on the road with the trailer over 80mph!

Repairing Flat Tires on ATV s
Utility Vehicles UTV/ATV
Replies 9 Post by regniflow