Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I am looking for a front universal joint from inside swivel housing on the front axle housing. Wondering if anyone can point me in the direction to purchase hopefully a new one or at least has anyone dismantled a SE1340 for parts. Located in Australia, shipping no problem. Thanks in advance Pete

Shibaura SpareSE1340
Shibaura
Replies 1 Post by olpete

Franck happy to arrange for a coy to be made from the two manuals I have. I will endeavor to obtain a price for printing a copy of each. My best contact is 0429116600 text me on that number or as an alternative email

vk2br at yahoo.com.au

use the usual symbol for at symbol. Regards Pete

Hinomoto HB501 backhoe Manuals advice
Hinomoto
Replies 19 Post by olpete

G'DAY all<br>
I am helping a friend who owns a DB 880 3 cylinder tractor. It has been sitting idle for about 4 years and recently we have been getting it back into working order. Problem now is the 3 point linkage will lift to full height but when we try lifting a load we can only get less than half lift. Transmission oil level was down so topped up to full mark, no change in lift height under load. Is there a seperate oil reservoir for the 3 point hitch? Seems like low oil level to me. Also there is a control marked "DEPTH/HEIGHT" any help with this would be appreciated thanks Pete<br>

DAVID BROWN SELECTAMATIC 880
Antique Tractors
Replies 2 Post by olpete

G' day all<br>
I still have an owners manual and a service manual ( both reprints ) for the HB501. AUD $75 plus postage. Contact me here or mobile 0429116600 regards Pete

HINOMOTO HB 501
Hinomoto
Replies 1 Post by olpete

Art White finally got back and had a look there is no sign of a relief valve under or any where near the oil filter. Haven't been able to find anything resembling a relief valve. Took the filter off the engine to look right under the mount for the filter. While I had the filter off thought I might crank the engine over to pump some oil out without going through the filter. With the fuel shut off I cranked a couple of turns and pumped some oil out into a rag. supply looked good so I replaced the filter, started the engine. No noise. I thought maybe some foreign object was in the oil gallery and causing the noise and when i had pumped oil out without the filter whatever it was got pumped out at the same time. After running for 5 minutes the noise returned. Really getting desperate. Where can I get a manual for this engine, it has cast onto the side of the block 653 cc. Only identificationI have found so far. Thanks for all the suggestions

Mystery Noise
Kubota Tractors
Replies 11 Post by olpete

I am trying to find out what pressure does the hydraulic system of a Kubota B7000 normally run at. Just bought a 4wd version, and want to fit a F.E.L. to it. Any help greatly appreciated thanks.

Kubota B7000 Hydraulic system pressure Level PSI
Kubota Tractors
Replies 2 Post by olpete