Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Well gave the tractor a workout today lifting and moving logs about. No sign of any leak at the back. So all is I hope well with the tractor.

Cheers

Mike

Jinma 354 engine diagram oil leak
Jinma Farmpro Agracat Nortrac
Replies 23 Post by locksleyred

Thanks to Murf, Greg and Kleinchris. Just wanted to make sure there was no simple answer to solving this problem.
Yes Greg the first place to look is under the cover which is what I finally did.

I also removed the cover on the other side so that I could see what was actually happening. Well I was right I could move the lever into 2 and 4WD but the gear in the dog clutch did not fully come out. On closer inspection the fork appeared to be bent. So out it came heated with gas and bent back into place. Replaced the fork and plate and from the otherside I could see that there was a 3mm clearance.
The tractor now goes between 2 - 4 WD easily. When going into 4th I move slowly forward with light pressure, and I find it much easier going back into 2WD by making the tractor move in reverse.

Thanks mates for your suggestions and sorry for the late response. Greg, I had all 4 wheels off the ground and when in gear all wheels moved.

Thanks once again,

Mike

4 wheel drive not disengaging on Jinma 354
Jinma Farmpro Agracat Nortrac
Replies 6 Post by locksleyred

Hi Earthwrks,
Thanks mate will try this out. Will try a smaller fitting to see what happens.
regards Mike

Back hoe for Jinma very jerky in movements
Jinma Farmpro Agracat Nortrac
Replies 12 Post by locksleyred

Hi Greg,
Yes I thought about the dipstick being the right one, and whether the oil was overfull but how does one know? And I take your point about self importing and no dealer support. The correct fluid has been used after I drained and flushed the tank etc. The oil is also going the right way.

Although there are some Jinmas around here, there are no backhoes so no help here. That's why forums like this are good because people with a common interest can offer help, advice or guesses as you put it. Sometimes one can be blinkered, can't see the forrest for the trees so to speak. It just needs someone looking in from the outside to offer their opinion and that's what makes us look and or re evaluate the situation, and more often or not find a solution.
I'll continue to monitor the situation and hope to get a reply from the manufacturer as to why they think it is happening. The moment I do I'll post their answer.

Thanks once again Greg and a guess is always 100% better than nothing.
Regards

Mike

Hydro oil frothing out of tank on 3 point b hoe
Jinma Farmpro Agracat Nortrac
Replies 18 Post by locksleyred

Thanks KT,
Have tried changing while there is a slight movement forward and the lever moves freely now, thanks for all the help / ideas.

Mike

Trouble switching between 2WD and 4WD
Jinma Farmpro Agracat Nortrac
Replies 6 Post by locksleyred

Hey Guys why not container pool. I just bought a JM354 etc etc but with Backhoe and loader and mower. Also bought 15kw generator etc etc Asked around the neighbours they wanted stuff too so I filled a container. Its not hard. Tractor cost $4600 in your dollars ( I'm in Australia )Picked it up on a friends 23 footer truck $100 fuel. Laughing. Took 2 of us 8 hours to put everything together. Never done it before. Yes a couple of parts missing but they are being sent over. What else was on the container? Heaps of fire fighting pumps, generators, small engines and pressure washers to clean the tractor. Everyone is happy except the ones that missed out!! Keep up the postings great reading.

Direct from China
Jinma Farmpro Agracat Nortrac
Replies 14 Post by locksleyred

Thanks once again Greg. The main reason why I went for the implements was that pricewise stuff like that over here is way too expensive, if it were simply a couple of hundred extra then I would not have bothered.

Can I take the greese out of the mower dif and replace with oil? My guess is that the dif won't hold oil.

Will read the other forums if I can get your address it didn't show as no doubt there is a block on such addresses. Having said that you can find locksleyred "at" you know that famous American Rodeo saying, and its not the "YEEHA" one. Dot COMputer dot AUstralia.

Mind you have read most articles on this site and they are very informative, but, you can always learn more.

I'm looking to have fun with my tractor lots of small jobs to do on my 50 acre farm. Look forward to your reply.

Thanks

Mike ( from under the Southern Cross )

Jinma 354
Jinma Farmpro Agracat Nortrac
Replies 6 Post by Locksleyred