Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Billy, re. hydro oil. I have 4200 HST, and below the air temp. chart in my manual it states "John Deere Low Viscosity HY-GARD..... is recommended. Standard John Deere HY-GARD.....may also be used." The next paragraph OK's other oils if they meet JD specs. My dealer says low visc should be used, and he gave me a free gallon of it. Ken

4610 ehydro pedal locations
John Deere Tractors
Replies 17 Post by kvh1942

I also have the 420 loader. Welded two chain type hooks on the top of the loader. Each is welded to the reinforcing plate where the arm attaches to the bucket. This seems to be the strongest place, and dealer said it was a good place. Works great. Ken

Hooks on my loader
Loaders Back Hoes
Replies 7 Post by kvh1942

Glenn, Gary L. is right on re. the smell with a new stove. I installed a Quadrafire last fall, and the owner's manual discussed this. It has to do with burning off cutting fluids/oils used in the mfg. process and curing paint. Since you have a lot of exposed inside pipe, it may take a hot fire. Ken

Woodburning Stoves
Home Improvement
Replies 39 Post by kvh1942