Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Oh, okay, I was actually thinking more of hooking the added lines up to the loader connectors and using the loader control valve. I realize that I would not be able to have the loader attached at the same time, but it would work nonetheless I would think.

JD 855 rear hydraulic outlet question
John Deere Tractors
Replies 14 Post by guysnydr

Anyone have R-4 tires installed on their 55 series tractors? If so I would really appreciate it someone could tell me what size they are, front and rear. My 855 has turf's and I am thinking about replacing them with R-4's. Also would appreciate any input on brands, cost, etc. Hope somone can help. Thanks!

Anybody have R-4 tires on their 755 855
John Deere Tractors
Replies 2 Post by guysnydr

If you are still looking for one, there is one available on ebay. I have seen this one in person and it is as close to new condition as one would find. Type in "John Deere 655" and she'll come right up. Auction ends september 25th. If by chance you miss it email the owner at steve.l@prodigy.net. He may still have it as it looks like he has had some trouble finding a buyer. Hope this helps.
Only thing you will want to verify is if the drive shaft, mounting brackets etc. will be the same for the 655. This unit came off of an 855. Shafts and brackets through Deere are SALTY! ....just a word of advise.

Front snowblower for 655
John Deere Tractors
Replies 2 Post by guysnydr

Deerecrew,
To answer your original question about the mmm on the 755, they are a sinch to get on and off. Once the deck is under the tractor, it takes maybe 3-4 minutes to mount. Getting it off is just as quick or quicker. There are no bolts to tighten, just 6 quick pins and the pto to hook up and you're off an mowing. I am sure that you could dismount/mount a 3 point a little quicker, but believe me, it isn't a significant time loss once one has done it a time or two. It's a very nice, easy design. I doubt you would find it to be much of an inconvenience. Plus the deck can be locked in the full upright position for other chores, which is nice. I prefer a mid mount to a 3 point personally, and feel that the 3 points are somewhat cumbersome. I can see where they would both have their merits though.

mmm vs 3pt finish mower
John Deere Tractors
Replies 19 Post by guysnydr

Looked at the serial number last night, it is D630053. If Tractor tips info is right, it would be an 89 model. Does this match up with everyone else's info? Also, what would the D indicate? Thanks!

Guy

Model year info for JD 855
John Deere Tractors
Replies 11 Post by guysnydr

Kevin, I think 13k is certainly a fair deal, especially with the hoe. I recently purchased a pretty nice 855 with 620 hours and front end loader for $10,200.00, which I felt was a reasonable price. With the backhoe, PH digger and hog, that is certainly fair in my opinion. I would certainly offer less and see what happend though - ya never know! Hope this helps.

JD855 PRICE CHECK
John Deere Tractors
Replies 3 Post by guysnydr

I have a JD 855 with special high roll bar (factory option for backhoe use, provides additional 6" of headroom over standard ROP). I would like to trade for a standard roll bar. If interested, please email me or call (570) 998-9057. I am located in central, PA. Thanks, Guy

Trade 855 high rollbar for standard
John Deere Tractors
Replies 1 Post by guysnydr