Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

I pulled the carb off again and decided to pull the jet out and replace it. I also pulled the air filter system apart to make sure the mice hadn't built a nest in it. I knew the other end of the cylinder type container was fine because I had changed the Air Filter. When I dis-connected the elbow from the carb, I would just twist it around and out of my way so I could get the carb off. This time I dis-connected the elbow from the air cleaner and I found in the end of it, what I later found out to be a restricter plate. It was lodged in the hose sideways. I pulled it out, put it back in the end of the Air Filter container, re-installed the carb and it runs like a champ. I have been through many "forums", looked through all of the parts diagrams that I have found on the net, and no where does it show this "restricter plate". I hope this will help someone else in the future who may have this problem.

2001 will idle but not run
Utility Vehicles UTV/ATV
Replies 6 Post by detel51