Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Tried to start my tractor this morning and it would not start. I have two new batteries. Jumped it to my truck but will not crank or turnover. When I turn the key I get nothing. Help!!

Tractor wont turn over
Jinma Farmpro Agracat Nortrac
Replies 4 Post by clarence

I am trying to find 2" cylinder rod seals for my front loader. I have tried local cylinder repair shops they don't have a seal this small.<br>
The seal part # Valqua UHS25, 25<br>
Thanks for any help,<br>
Clarence

Yanmar 2010D Front Loader
Yanmar Tractors
Replies 1 Post by Clarence

Most of the older snowblowers and some of the newer ones have a gap between the impeller blades and the housing �� to �� this is mainly used to allow objects to pass through and also to keep the blades from freezing to the housing. Some of these gaps are enlarged by wear or just a poor design (too large). This kit will work on most dual stage snowblowers and on some of the larger single stage snowblowers, it consists of rubber paddles that bolt on to the impeller blades therefore sealing between the blades and the housing. If the snow slips past the impeller blades it has time to accumulate and then tries to discharge it in large amounts resulting in a plugged chute or poor discharge. By creating this seal all the snow Is discharged and nothing accumulates in the housing, the snow is discharged evenly resulting in it being broken up, and also increases the leverage by lengthening the impeller blade.

Snowblower clogged up in wet snow
Snowblowers / Snow Plows
Replies 5 Post by Clarence