Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I have a SU1341 that I had to clean the pickup sceen for the hydralic pump to get the hydralics to lift the rear tiller based on advice from one of the folks on the discussion. The hydralics will now lift the tiller. I have one more question in regards to this if anyone has any advice on this. The little lever you pull back to lift the tiller seems to have a top, middle, and bottom, nothing really happens except when you pull it all the way back and it lifts the tiller, then if you let go of the lever the tiller bleeds off and goes to the ground pretty slow, but does go down. Lastly when I put it to what I would think would be the lowering position, no change really takes place. <br>
<br>
I'm wondering if theres a valve or something that also needs cleaning or if this is pretty natural for these little SU1341's. Would appreciate anyones elses thoughts on this. Thanks

SU1341 hydralics will not stay in raised position wonder whats wrong
Shibaura
Replies 5 Post by bearcreek

Hi Greg, I wanted to first of all say thanks, I found and cleaned the screen. The hydralics will now lift the tiller. I have one more question in regards to this. The little lever you pull back to lift the tiller seems to have a top, middle, and bottom, nothing really happens except when you pull it all the way back and it lifts the tiller, then if you let go of the lever the tiller bleeds off and goes to the ground pretty slow, but does go down. Lastly when I put it to what I would think would be the lowering position, no change really takes place.

I'm wondering if theres a valve or something that also needs cleaning or if this is pretty natural for these little SU1341's. Would appreciate your's or anyones elses thoughts on this. Thanks

SU1341 hydralics don t work
Shibaura
Replies 5 Post by bearcreek