Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Looks interesting, does anyone know who sells it and how much per gallon? At Amsoil pricing 10 gallons can get a bit pricey. This should be a better deal.
Pacesetter

Synthetic Hydraulic Fluid
Parts and Repair
Replies 83 Post by Pacesetter

Curious what kind of problems you have had. Masseys have a very good reputation.
Pacesetter

MF 1160 Problems
Massey Ferguson Tractors
Replies 6 Post by Pacesetter

Check these guys if you want a real square deal. Ask for Mark. Their prices were over $2k less than my local dealer AND they are a first class outfit.
Good Luck
Pacesetter

John Deere Dealer on Web
John Deere Tractors
Replies 4 Post by Pacesetter

Congrats on your selection. It was once high on my list until I bought a Century 3045. I gave up the hydro and a few bells and whistles. In return, I got a much heavier tractor with a 48 HP Yanmar four cyl for not a whole lot more than you paid. If I didn't feel I needed more power, I would have been very happy with a 3130. The Century Branson line seem to be about the most trouble free tractors out there. I'm sure the rear end problem was a fluke as you mention. I heard from one Century owner that the dealership he bought from has sold 170 machines and had one warranty repair. There are zero defects on mine. Of the big three (Kubota, JD and NH) and the relatively big three Korean(Mahindra, Kioti and C/B) there are no common problems that should keep a buyer away from any of them. They are all relatively trouble free. Enjoy and keep us posted, you started a lively thread :-)
Pacesetter

Mahindra pricing versus JD Kabota NH etc
Parts and Repair
Replies 49 Post by Pacesetter

The TC29 is going to be discontinued by the end of the year. I would rather have the TC33 in your circumstances. If you have a lot of tight areas, you might want to look at Super Steer. I still use a lawn tractor, lawn mower and high wheel trimmer along with my tractor. I purposely gave up the mowing aspect for other capabilities like bush hogging and FEL work.
Pacesetter

TC24 TC29 TC33
Operating and Attachments
Replies 6 Post by Pacesetter

I know it's more money, but I would check out one of the 00 series Mahindra. The 4500 comes in 2WD, gives you the 10 extra HP and is a much more modern design. I was impressed when I looked at the 4WD version. It was just too much tractor for my needs.
Pacesetter

Mahindra 3505-DI
Other Tractor Brands
Replies 8 Post by Pacesetter

I would look at every tractor in the range of what you want and can afford that I could. For the big three, I would also check out New Holland TC30, especially if you might want a hydro. Others to check out would be the Branson/Century and Mahindra for Korean tractors. At least when you do make your decision, you won't have any second thoughts or regrets.
Pacesetter

JD 790 or Kubota L3000DT
John Deere Tractors
Replies 51 Post by Pacesetter

Poulan makes a good saw for the occasional user. I carried one around for years in my old Bronco for camping an clearing trails. They make them for Sears, so same saw, different color. Now that I have the farm, I have an Echo 3450. Found it used, but like new, for a super price and bought it. I liked it so much I have an Echo 510 on the way that I bought on eBay. I have less than $350 in two saws that will do what I want and not give any problems. If the 510 won't cut it, I don't want to cut it:-) Absolutely nothing wrong with a Stihl or Husky, I just find these suit my needs for a more attractive price. Regarding the price of parts, I have found the following link a great place to buy supplies.
Pacesetter

What kind of Chainsaw to buy
Shop Tools
Replies 80 Post by Pacesetter

Zetor is a great value in a utility tractor. I bought a Century 3045 mostly because of the 14 acres of former pasture I have. They are imported by the same company. IF you're sure you are not broadening the scope of your use, they are worth a look for sure. If you have any visions of getting other attachments such as a FEL, I would go more with the CUT and 4WD. Personally I can't imagine having a tractor without a FEL and I can't imagine having a 2WD tractor with a FEL. I would carefully evaluate what your needs are. Any new tractor is a large investment to only use for occasional bush hogging. Very difficult to advise without knowing more about your situation.
Pacesetter

Zetor Tractors Anybody have info they can share
Other Tractor Brands
Replies 2 Post by Pacesetter

With about $20k invested, I would get the best oil possible for the application. My Century has the same engine as a JD 4710. Once broken in, I will switch to this oil and keep good records. If there is ever a problem, I'm covered to the tune of about $6 grand. Worth a few extra bucks once a year.
Pacesetter

Oil Change for Diesel Tractor
John Deere Tractors
Replies 69 Post by Pacesetter

Congrats, I think you'll be fine with the 40. There are a few instances where it ISN'T cost effective to go the next larger. IMHO, TC45 is one of them. Others are the JD4410 over the 4310 and the Kubota L3430 over the L3130. Once you get it on the property, it won't seem as big as it did at the dealers.<br>
Pacesetter

TC33D vs TC40D
New Holland Tractors
Replies 6 Post by Pacesetter

I just brought my Century back from the dealer. Weight with loader is about #5200. I have an 18' full deck heavy duty trailer with load equalizer and four wheel electric brakes. I brought it back with our 3/4 ton 4X4 Suburban. We certainly knew it was there. Based on that recent experience, if I had a 1/2 ton and only a 16' trailer I think I would heavily lean toards the 4310. Especially if as you state you will be constantly towing it.
Pacesetter

4310 or 4510 - Towing with trailer
John Deere Tractors
Replies 5 Post by Pacesetter

I test drove a Massey 2300 when they first came out. I knew from the get-go it was too small for my use, but I was impressed with it. One feature, the rear mounted radiator, I especially liked as the radiator in my Honda constantly gets clogged with lawn debris. IF you have a good dealer, and IF the price is right (under $13,500 with FEL and mower) I would strongly consider it. IF you like the JD as well and the deal and dealer are as good, I would personally go with the JD, if only because of resale value and parts availability.
Pacesetter

Looking for comments on a MF GC2300
Massey Ferguson Tractors
Replies 35 Post by Pacesetter

Think I found it at WIX. The number I came up with is 51356. NAPA drops the 5 in front so their number is 1356. BTW: Napa Gold filters are Wix, not sure who makes the silver, but that are a different brand. Possibly rebadged Fram or Champion.
Pacesetter

FILTERS
Mitsubishi
Replies 12 Post by Pacesetter

They're both about the same. I would go with the one who has the best dealer for support.
Pacesetter

KingKutter or Howse 4 or 5
Mowers Field and Finish
Replies 11 Post by Pacesetter

I will add the 12LA is their new series of loader. The new 14LA will have much more capacity than the 7308, but NH revised the tractor to take the weight. The 7308 is spec'd light for the TC33 boomer. It actually had heavier specs on the 1720 Ford. The specs take into account the limits of the tractor they are installed on.
Pacesetter

FEL - Class I vs Class II
New Holland Tractors
Replies 5 Post by Pacesetter

You really don't even need an L series. A BX2200 will do fine. It is a better grass cutter that about any other Kubota and can lift about 500 lbs. of dirt at a wack. How much more you got to do than that?? There are really no tractors like adjustable wrenches. The better it is for one job the worse it is for another. My Century is right up there with the Kubota 4630. I have 48HP and it weighs 5000 lbs. It's way overkill for my three acres of grass to cut. I keep my Honda tractor for that and use the Century for the heavy stuff.
Pacesetter

L4630 or other Kubota
Kubota Tractors
Replies 7 Post by Pacesetter

It will be worth the trip. I am THRILLED with my 3045. Did a lot of loader work this weekend and it performed flawlessly. The C50 alone is well worth leaning to Century IMHO.
Pacesetter

Branson vs Century
Other Tractor Brands
Replies 39 Post by Pacesetter

WOW! I thought we had it bad in the Northeast! Those sound like good prices if you are in Canada. In American dollars they are very high. Personally, I like NH, but I wouldn't buy one now - except if I wanted a TC30. They are revising the product line and substantially upgrading the TC33. The TC29 will be discontinued as the TC25 has been already. In round numbers those prices are about $3K high. I can't imagine what orange and green are!
Pacesetter

TC30 TC29D
New Holland Tractors
Replies 13 Post by Pacesetter

Hey Mark, Glad it worked out for you. I wish there was a KC Canary near me! Keep me posted on how you like it.
Pacesetter

JD 4300 price check
John Deere Tractors
Replies 7 Post by Pacesetter