Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I forgot to say that I've got turf tires and use chains. I had to make spacers for the wheels so that the chains would clear the fenders.

Ken

Ford 1300 Two cyl Deisel noisy
Antique Tractors
Replies 4 Post by Ktallman

I have a 1300 Ford. Last week my water pump went. I went to my neareast NH dealer and he got the parts within a few days. My tractor was made from 1979 to 1984, and I was wondering about getting parts. The dealer told me he could get almost all parts. He said there are some exceptions, but usually he can get the parts.

Shibura engine rebuild kit
Parts and Repair
Replies 3 Post by Ktallman

I have a 1300 Ford compact tractor with turf tires that I made spacers for. I needed just a little bit more clearance for when using chains. I made them 1 inch thick. They work excellent. I left them on all year but only need them for snowblowing. I went to a local bolts supplier to got the longer metric bolts that I needed. (mine has standard metric bolts but yours may be lug type) I made mine out of 1 inch stainless steel that I got where I worked. They were very easy to install. The biggest cost was the hardened metric bolts. I read on some other site that they didn't recommend doing thisbut I didn't have any other choice. My land is flat and I only mow about 4 acres and snowblow a 350 foot driveway with my tractor. So far no problems with the spacers. I chech the wheel bolts regularly but have not had any loosen up.

rear tire chains
Parts and Repair
Replies 6 Post by Ktallman

I have been shooting trap for about 30 years. I started out with a 1100 Remington. It is a fine gun. I presently shoot my Browning BT99 or my Browning Citori Ultra Trap over and under. I also have a Winchester 101 Pigeon Grade Trap over and under.

Favorite scatter guns
Website Operations Howto
Replies 13 Post by Ktallman