Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Mine does it in forward and reverse. Talked to a serviceman at Kubota. He said it is caused by the neutraling valves in the trans. He said it can be adjusted but you have to remove the valves and weaken the springs by cuting a coil at a time off the spring until it doesn't do it. The valves are located on top of the trans. and are easy to remove. He told me to take it to the dealer and they might do it for free even though it isn't a Kubota sanctioned fix. There are two valves, one forward and one reverse.

B2410 lurch in hydro trans when starting out in high
Kubota Tractors
Replies 25 Post by JimMcD

I have a 2410 with a la352 loader. When I bought the tractor they told me if I wanted to put a front blade or snowblower on the tractor I would need a four possition spool valve. I don't know if that is what you are calling a four way valve? I have always wondered if I got a four possition valve. I tried out tractors with loaders before I bought mine and all had down pressure and was told they had three possition valves. The only thing I have noticed is when I dump the bucket there are two possitions on the dump. If you push the lever to the right against what feels like a stop the bucket will dump. If you push it harder to the right it will go farther and will dump about twice as fast. I have no idea what this is or what this is for. If some one knows, let me know. The second possition feels like the float on the boom except the lever does'nt stay in that possition when you let go of the lever.

kubota 3 way valve VS 4 way valve
Kubota Tractors
Replies 35 Post by JimMcD