Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Sounds kind of nice, obviously they didn't have to. So three cheers for John Deere. No, I don't own a deere just agreeing with MLS. :)

Is this standard or does JD really care
John Deere Tractors
Replies 8 Post by Jerri

Bill, OK let me make sure I am answering your question. Yes, to most residential structures are 220/120 single phase. This would conist of two phase conductors, a neutral and a ground established at the residence (not from utility). Now for your welding outlet, or any other outlet as that goes, you do want the same setup, two phase conductors and a neutral, if there is a ground great but you are acting just like the utility here. So ground the generator and you are already grounded at your panelboard. As for voltage readings, you should have 220 between your two phase conductors and 120 between any phase conductor and the neutral/ground (these two are really connected together). Hope this all makes sense but if not, feel free to email me directly and I will try to help.<br>BTW are you here in NC? If so, I am located in Durham and small world.<br>

PTO Generator
Shop Tools
Replies 21 Post by Jerri

Craig,<br>OK you now have part of your answer. First the engine is manufactured by Toyosha, but the tractor was made by Hinomoto. Are parts available, yes. Can you pick up any part any time rapidly, no. I will check with some other folks about this particular tractor. I own a Hinomoto E2304 or an equal to MF 1030 which also crosses over to an Allis tractor. Hope this helps some.

Need info about Japan tractor sold by AllisChalmers as 6140
Yanmar Tractors
Replies 3 Post by Jerri

Mr. Lopez,<br>I own a Hinomoto E2304 for which I have been chasing a pto countershaft for, so I understand the parts problem. I have seen a post regarding rebuilding water pumps I believe on the grey market board. That is one possibility and I may have some other recommendations for parts suppliers. You may feel free to email me if you would like.

Hinomoto 174
Hinomoto
Replies 8 Post by Jerri

R. Kelly,<br>Farmers equipment guide lists an average auction price of $10,793 with a low of $8,322 and a high of $12,389. <br>Hope this helps.

ANYBODY KNOW VALUE OF A 1990 JD 755 COMPACT
John Deere Tractors
Replies 3 Post by Jerri

Andy, you might want to look up a few of the posts here for Chinese tractors. The posts are both pro and con. Things to consider are yes it is less expensive but why? How well built are these tractors, do they have a good service network, are parts available? I think it would be both unwise and unfair to compare the Task Master to the Kubota this is an apples to oranges comparison. Instead, if you are interested in the Task Master, talk to those who own them and their impressions. I would think the dealer of these tractors would be willing to help you contact owners of these machines. If after have done your investigation no major problems or concerns are uncovered and you are comfortable with the tractor, by all means move forward with a purchase. Last but not least, I believe there is a reason this tractor is less expensive and some of these reasons maybe acceptable but others may not. <br>Good luck whatever you decide.

Why not a Task Master over a Kubota
Operating and Attachments
Replies 13 Post by Jerri

Del, don't have much background here but do know Shibaru builds compacts for New Holland. You might post this question at the grey market tractor club.<br>http://clubs.yahoo.com/clubs/greymarkettractorclub<br>Good luck<br>Jerri

Shibaura Tractors need information
Shibaura
Replies 7 Post by Jerri

Brian, can't help you much myself but you might try posting your question at the Mitsibushi Tractor Club. Go to http://clubs.yahoo.com/clubs/mitsubishitractors<br>Good luck,<br>Jerri

Help Indentify my Tractor
Other Tractor Brands
Replies 2 Post by Jerri

Keith,<br>Can appreciate your buying a John Deere and sure you will be happy but note that Wayne didn't say to not buy greys but take care about what you buy and from whom. Grey market tractors are like any other tractor in that you need to know what you are buying and that both service and parts are available. You should note that your John Deere is a Yanmar but is backed up by John Deere which say a lot. The same tractor wearing a Yanmar badge sold by Joe Shmuckatela has no such backing even if it is the same exact tractor. See where I am going here, like you have heard before that it isn't so much the tractor but the dealer who sells it and by the way, yes I own a grey, a Hinomoto E2304.<br>

Mitsubishi D2000 2wd price should I purchase
Mitsubishi
Replies 7 Post by Jerri

George, I have an E2304. Haven't had much opportunity as of yet to use it....soon I hope. How do you lile your E324?

Hinomoto E324
Hinomoto
Replies 10 Post by Jerri

Dan, according to Farm Equipment Guide average auction price for this tractor is $8057 add about 2 to 3K for the loader and 3 to 4K for backhoe for $13000 low side and $15000 high side. Also note that auction prices vary from $7235 to $8714. <br>Hope this helps.<br>

JD 955 w Series70 loader 516 bushhog amp backhoe
John Deere Tractors
Replies 3 Post by Jerri

Mark,<br>Sorry you didn't find any help but here is what I found out. According to Farm Equipment Line this tractor was manufactured from 79 to 83, it is manufactured by Shibaru has a 3 cylinder 87.2 cubic inch diesel rated 26.88 pto HP. Average auction price is $6,799 with low of $5,271 and high of $8,198. <br>Hours sound high, price low so depending on how it looks to you may be OK. BTW I have zero expierence with this tractor.

Ford Model 1900 Diesel Tractor
Parts and Repair
Replies 5 Post by Jerri

Mark, <br>Are you sure it is a 920. I was trying to look it up for you on the Farm Equipment Line but found listings for 9200 or 950 and etc but no 920. Let me know if it a 9200.

JD-920 Utility Tractor questions
John Deere Tractors
Replies 2 Post by Jerri

Jeff,<br>You might try posting this question at the Yanmar Tractor Owners Group at:<br>http://clubs.yahoo.com/clubs/yanmartractorownersgroup<br>They might be able to help.....Good luck

Yanmar 336D - Pricing
Yanmar Tractors
Replies 3 Post by Jerri

Well not sure what proper price is or what you mean by that but avg. price as listed by farm equipment hotline here in the US of A is $19,283, list is $25,507 and loan is $16.069...hope this helps.

5410johndeere
John Deere Tractors
Replies 6 Post by Jerri

Tim you propose what a lot of folks do and to a point it is not dangerous. Things to watch out for, if you need 110 you will have to pull a neutral from the generator. Hooking up 220/240 volt to a 2 pole breaker will not give you 110. As the other post mentioned, make sure you ground the generator and connect this same ground to the panel. Last, make sure you turn the main off and all of the other breakers until you start the generator. Bring the breakers back on line one at a time making sure you haven't overloaded the generator.<br>If you plan to leave the generator connected all of the time or want something less temporary, there are a number of different ways to do this. Feel free to contact me if I can help. By the way I am a consulting electrical engineer.<br>Good luck.

back feeding panel
Other Tractor Brands
Replies 4 Post by Jerri

Jason, I have been sitting on the side lines watching this one and the problem is that none of us have the whole story. We have one side and that seems to not have a lot of information. I do not know if you are in sales and if that might affect your answer. I do not sale tractors but I am in the service business and am all too familiar with the folks who only want the lowest price. I have to say that I expect those who are only interested in price get what they paid for. If they are really fortunate, they get more but all of us know that rarely happens. <br>OK so enough of that and back to what we do know happened. This guy went to shop B for the lowest cost. We will assume that this shop will provide equal service and for the time being all else is equal with the exception of cost. Dealer A who lost the deal is now not interested in selling parts either. Although I can understand dealer A's irritation at losing the deal, I also understand that he forgot the first thing about sales, and that is that the custormer is always right. Sell him the parts, make your profit, take care of this guy and maybe just maybe next time you will sell the tractor. All dealer A has now done is gurantee this guy will not come back and worse yet he will tell all his friends and neighbors this guy is not good to deal with. <br>So who lost in this deal. Very simply the dealer both coming and going and now he has compounded the problem. For all sales, service and etc. folks, remember we work for these people. We don't always like what they do, or who they are and etc. and etc.. But if our businesses are built on selling only to who we like, then we will shortly be out of business. I hope others who work with the public understand what I am saying, but I am afraid many do not.

DEALER
Other Tractor Brands
Replies 16 Post by Jerri

Oops...sorry, should have said the 430 and 440 loader CAN pick up more...about 400 to 500 more pounds.

JD 790 vs JD4300 or 4400
John Deere Tractors
Replies 14 Post by Jerri

Bruce is it a 2wd or a 4wd, looks like average price for 2wd is $5400 and for 4wd is about another $1000. Without knowing condition of implements and etc., would assume about another $750 to $1000 with the tractor. Hope this helps. By the way these are average auction prices off the Farm equipment guide.

What price should I Ask
Massey Ferguson Tractors
Replies 3 Post by Jerri

Try the Tractor Supply Co., as I recall less than a hundred bucks.<br>http://www.tractorsupplyco.com<br>These guys have 265 stores in 26 states and may have one near you.

Sun shade Canopy Needed for NH TC18
New Holland Tractors
Replies 4 Post by Jerri