Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

I have a Belarus (Pray) 310 Tractor. I've been trying to rewire the<br>
starter solenoid. The coil works fine, but the wiring to the coil is<br>
all corroded. <br>
<br>
When I tried to get the coil to throw the solenoid by hooking it up<br>
the way I thought I should, I get nothing; that is connecting the <br>
body/ground to negative battery, and the power connection to to <br>
positive battary; nothing happens even when you short the starter switch/relay stud to positive..<br>
<br>
If you take the cap that holds the electrical connectors off the <br>
coil, you see that there are only two connections going into the<br>
coil. One which goes to the starter relay/switch stud actually<br>
has two wired connected together which go into the coil. The <br>
other wire goes to the positive battery power.<br>
<br>
The only connection I found to make the solenoid coil react is<br>
connecting the two wires going into the coil to positive and <br>
negative battery. Then the solenoid goes off!<br>
<br>
This doesn't make any sense to me because the one wire goes<br>
to the main battery positive power stud; the two wires that go<br>
into the coil together go to the starter relay/switch!!!<br>
<br>
Now I've paid to have this starter 'rebuilt' a couple of times;<br>
it didn't seem like they were really doing anything because it<br>
fail within a years again. So I decided to clean it up myself.<br>
Maybe it's wiring is no longer original?<br>
<br>
It doesn't help that you have to unsolder a couple of connections<br>
just to get the cap off, and there's no way to put it back together<br>
because the starter relay stud is soldered to a wire with no slack.<br>
I put a ring terminal on the starter relay stud under the cap on a<br>
wire a couple inches long to give me enough slack to push the<br>
relay stud through the cap and then screw the cap on, and solder<br>
the ring terminal outside the cap on the main power stud to the<br>
wire that goes through the cap to the ring terminal.<br>
<br>
Is it supposed to be like this? Has this already been screwed over<br>
sometime in the past?<br>
<br>
Thanks, Jaimes Beam

Belarus 310 Starter Solenoid Wiring
Belarus
Replies 3 Post by JaimesBeam