Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

There are two positions on the ignition switch to activate the starter. One in the normal position like a car and one full anticlockwise. Try cranking the engine by turning the key full anticlockwise. This will not activate the glows but if it cranks then the following may be your solution. There is a point just before start where Jinma ignitions tend to activate both the starter solenoid and the glow plugs at the same time. If you turn the key too slow after activating the glow plugs both the solenoid and glow plugs together will draw too many amps and blow the fuse. This can be overcome by turning the key to glow then quickly turning the key to start. Alternatively turning the key to glow then turning the key full anticlockwise to activate the starter only. Once running turn the key to on.

jimna 2524 busting 30 amp fuse wont start
Jinma Farmpro Agracat Nortrac
Replies 10 Post by Dino_JMWA