Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I also have a 7265. When I turn the key on my glo plug light comes on for 2 seconds then goes out. Even on the coldest days. Never saw the glo plug light come on while operating. Had a starting issue that turned out to be Starter not spinning fast enough. rebuilt starter and engine starts right up ever since.

Cub 7265 Glow Plug Lamp On During Operation
Cub Cadet
Replies 3 Post by DANBPA

I had to replace the fuel line on my cub cadet 7265. How do I Prime this so that it will start again?

how to prime a cub cadet 7265
Cub Cadet
Replies 2 Post by DANBPA

Answered my own questions. Had to use heavy hammer and block of wood. Took some pounding all around hub cover, then once crack appeared got small screw driver and opened it up the rest of way.

Cub Cadet 7265
Cub Cadet
Replies 3 Post by DANBPA

I was able to resolve this issue. Turns out that after I replaced the Glow plugs and relay, battery etc. It was the Starter. The starter was not spinning fast enough. Since then it starts up on first crank very quickly. Thanks for all your input.

Cubcadet7265 hard to start
Cub Cadet
Replies 10 Post by DANBPA

Will I need any special tools to say remove the existing seal or to re install new seal?

Cub Cadet 7265 gear oil dripping from front left
Cub Cadet
Replies 4 Post by DANBPA

I see there is gear oil dripping from front left wheel hub. It could be a oil seal. Question for someone who's familar with repair is. If I take that shaft off to get at Oil seal will all oil pour out? Better question maybe How do I replace the oil seal? Sorry guys not a mechanic but I'm willing to get dirty:)<br>
Thank you in advance for your input<br>

Cub Cadet 7265 gear oil dripping from front left
Cub Cadet
Replies 1 Post by DANBPA

Thank you Art

Looking to buy Cub Cadet 7265 Need rough price I should pay
Cub Cadet
Replies 3 Post by DANBPA