Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I recently purchased a Shibaura Steiger special tractor, the three-point lift on the back of the tractor does not operate.it uses two solenoids which are mounted on the back of the hydraulic unit by the arms. The wiring had been disconnected and reconnected to switches, I would think this had been done because the automatic sensor on the arm stopped working to make those connections. The switches are wired to this solenoids obviously to activate them. Does anyone know where I can get a new solenoids for this tractor there is a number on the solenoid 405. I don't think the second solenoid towards the back channel is working and is locked in place. Any help would be greatly appreciated I can not see the plunger for this solenoid doing anything since the pin it would push down is locked into place all the way down. I was told that that the number relating to this tractor was SD2203, it also seems match the Ford model 9000. But the Ford does not use the solenoids and is totally mechanical. Any ideas or help anyone could offer would be greatly appreciated. Bob Davis

shibaura hydraulic three-point lift system
Shibaura
Replies 5 Post by Cabinetmaker

I bought a shibuara SD2203, It's a Stiger FL 20-50, I fixed the Hyd.system for the front end loader but the 3 point lift was locked with the arms in the up position. I released the fluid and the arms came down, but I can't get them to raise again. This unit has two solenoids mounted on the hyd. unit behind the seat, somebody changed the wireing and connected them to switches. Does any one know the order these solenoids should be turned on? I tested them and they seem to activate ok, but still no lift by the arms???Any help would be greatly appreciated. bob

Shibaura SD2203-3 point hyd lift won t lift How does system work
Shibaura
Replies 1 Post by Cabinetmaker