Go BottomRotary Cutter Shifting Problem
 | Gary
Join Date: Feb 2002 Posts: 43 vermont 
|
1999-01-14 809
I have a CaseIH 30HP compact tractor made by Mitsubishi with live PTO. I have a problem shifting when using a rotary cutter. In order to change gears I have to wait for the cutter to stop spinning. I can take it out of the gear that I was in when I started the cutter, but I cannot put it into any other forward gear or reverse until the cutter stops spinning. I have been through the clutch adjustment procedure in the manual but that did not help. Any ideas?
Reply to |
Quote Reply |
Add PhotoRotary Cutter Shifting Problem
| guest
Join Date: Aug 2017 Posts: 0
|
1999-01-14 810
If you don't want to spend alot of money taking it to a dealer and getting the tractor fixed, I recommend getting a Pto overrunning clutch that just slips on to your Pto shaft and then you put the pto shaft of your implement on the shaft of the clutch. They made these for the tractors that do not have live power like the Ford 8n's. ....
Reply to |
Quote Reply |
Add PhotoRotary Cutter Shifting Problem
| guest
Join Date: Aug 2017 Posts: 0
|
1999-03-23 1922
I have a IH 254 also made by mitsubishi, to solve this problem I press the brake with the clutch to stop the pto, both should be pressed simultaneously. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This