Go Bottom

---

MMM deck leveling

cdcole Join Date: Jul 2003 Posts: 66 Saukville, WI

2002-09-03          41961

It seems that I need to raise the right drag link about 2" higher than the left to achieve a level deck. Is this true for anyone else? Or does this mean that the deck lifting rods need to be adjusted?

Reply to | Quote Reply | Add Photo

---

MMM deck leveling

Tom Kopf Join Date: Posts: 1

2002-09-04          41985

Always check tir pressure first. I made this mistake with my ZTR mower. ....

Reply to | Quote Reply | Add Photo

---

MMM deck leveling

Jerry D Join Date: Posts: 1

2002-09-04          42006

First, check tire pressure. After that follow the mower deck owners manual. It's actual sort of difficult, but once adjusted it should stay. My "biggest" problem was the adjustable link..I tinker with it for different implements and finally measured the overall length..wrote it on the back of the toolbox. It works for me. ....

Reply to | Quote Reply | Add Photo

---

MMM deck leveling

cdcole Join Date: Jul 2003 Posts: 66 Saukville, WI

2002-09-04          42013

Jerry - I wish it was a little more intuitive. I have only had the tractor for a few weeks and am getting used to it. There are at least two, maybe 3 points on each side where I could possibly make a MMM leveling adjustment. 1) I assume that the nuts on the springs at the rear are not going to level it. 2) The rod can be taken up or loosened at the front. 3) The rod can be taken up or loosened at the back. Right now all of my rods are flush with the U shaped clevis tapped hole ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !