TC29D FWD Shaft
keith rose
Join Date: Posts: 1 |
2001-07-16 30143
Just Did my 50 hr. service and while greasing all the lub. points I noticed a bronze split bushing on the fwd shaft. It appeared to be a guide bushing to hold the black tube tight at the top end of the spline shaft. I reinstalled the bushing into the shaft but am worried it is going to work its way out again. Has anyone else had any problems with this bushing? Thanks for any info.
Reply to | Quote Reply | Add Photo
TC29D FWD Shaft
MarkS
Join Date: Posts: 1 |
2001-07-16 30145
I just complete my 50hr service too on my TC40D, I know its not the same machine, but I haven't notice that on mine. ....
Reply to | Quote Reply | Add Photo
TC29D FWD Shaft
keith rose
Join Date: Posts: 1 |
2001-07-17 30188
Thanks for the feedback, hope it holds together maybe I will call the dealer and ask them. ....
Reply to | Quote Reply | Add Photo
TC29D FWD Shaft
Tim Connolly
Join Date: Posts: 1 |
2001-08-08 30786
Hi,
I just went out and looked under my TC 33D. I didn't see anything that resembled what you described on the FWD shaft.
Tim C
Maine ....
Reply to | Quote Reply | Add Photo
Go Top
Share This