Go BottomWheel Contacting Loader Mount on TC40D
 | MarkS
Join Date: Posts: 1 
|
2001-06-18 29377
On several instances when turning my tractor full left I have noticed the wheel sticking. I finally figured out what was going on. When the front wheels are in the full left position the lugs on my r4 tires actually get hung up in the loader brace that runs the length of the tractor. When turning right the other wheel doesn't get hung up. Anyone else had this happen with thier tractor? Anyone know if this is just an adjustment problem? I haven't had time to look at it real close yet.
Reply to |
Quote Reply |
Add PhotoWheel Contacting Loader Mount on TC40D
| MarkS
Join Date: Posts: 1
|
2001-06-18 29378
I also forgot to mention that I noticed a small grinding/wear mark on my connecting rod for the steering. It doesn't appear that anything could hit this, but something has been grinding on it. The spot is about 3/8" wide and 1/8" deep. ....
Reply to |
Quote Reply |
Add PhotoWheel Contacting Loader Mount on TC40D
| John Miller, III
Join Date: Posts: 1
|
2001-06-18 29383
I'm not familar with your NH front end, but on JD, they have a "stop bolt" adjustment on each side for clearance purposes. This is one reason it's not recommended to put chains on the front tires. Your owner's manual should show you the adjustment procedure...normally 1 - 2 " clearance... and don't forget the whole front axle pivots as well... ....
Reply to |
Quote Reply |
Add PhotoWheel Contacting Loader Mount on TC40D
| MarkS
Join Date: Posts: 1
|
2001-06-21 29495
Anyone else own at TC35/40/45D with a loader experience this? ....
Reply to |
Quote Reply |
Add PhotoWheel Contacting Loader Mount on TC40D
| gary mason
Join Date: Posts: 1
|
2001-06-25 29597
marks
are we talking SS here or just the regular steering?
I've got a tc35d no SS and this is something I haven't noticed as yet.
gary ....
Reply to |
Quote Reply |
Add PhotoWheel Contacting Loader Mount on TC40D
| Robert Macan
Join Date: Posts: 1
|
2001-06-25 29599
MarkS,
I have a TC40D with Super Steer and the 17LA loader and have not had this problem. Sounds like something may not adjusted correctly.
Bob ....
Reply to |
Quote Reply |
Add PhotoWheel Contacting Loader Mount on TC40D
| MarkS
Join Date: Posts: 1
|
2001-06-25 29602
I do not have the SS option. It is just a standard TC40D with a 16LA loader. I breifly looked at the front end this weekend and saw no "stops" or "adjustment" options that could fix the problem. I have noticed that the problem only occurs when the loader is installed. During my daily use without the loader the interference never occurs. I'm puzzled. Maybe its time for a dealer visit. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This