Go Bottom1030 Massey Ferguson
 | Steve Coventry
Join Date: Posts: 1 
|
2000-12-19 22648
Has anyone installed a loader on a tractor not so equiped What all do you have to do to add one and how much does it cost.Thanks Steve
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| DanaT
Join Date: Jun 1999 Posts: 138 Clay Center,Ks
|
2000-12-20 22650
I have installed a JD 70 on a 755, It went on good, it took me and my dauther about 2 hours. I will be installing a GB loader on a 4300 when it comes in. they do come with instuctions. If your looking at loaders you might check out GB loaders, they have a 2YR warranty,built heaver, come with or with out DSCV as well as quick tach buckets and there less money.
www.greatbendmfg.com ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| Steve Coventry
Join Date: Posts: 1
|
2000-12-20 22666
Does the 1030 have enough hyd. to run aloader.thanks Steve ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| dave piper
Join Date: Posts: 1
|
2000-12-21 22682
My brother owns a 1030 with a FEL. It has a 1/3 yd. 60" bucket that it operates just fine. I used it just recently to put a 750# round bale in the back of my pickup. No problem as long as the back end has some ballast on. Dave. ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| Steve Coventry
Join Date: Posts: 1
|
2000-12-21 22686
Dave Thanks for info. it is appreciated. Steve ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| Brent Pepper
Join Date: Feb 2002 Posts: 58 Athens Alabama
|
2000-12-22 22714
Steve,
I have mounted loaders to Hinomoto E2304's which are essentially the same as the 1030. It is very important that you use a counter weight on the rear so as not to put too much of a load on the front wheels/gears. ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| Steve Coventry
Join Date: Posts: 1
|
2000-12-22 22724
Thanks Brent I'am thinking about construting my own loader. Steve ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| Bob Snyder
Join Date: Posts: 1
|
2000-12-25 22802
I have a 1987 Massey Ferguson 1030 and a Massey Ferguson 1016 loader. It works great. I have filled the rear (turf) tires with CaCl to improve traction and reduce load on front wheel drive. The loader seems to have plent of power and speed. The only thing I notice is that the bucket tilting is slow when the engine is idling.
Bob ....
Reply to |
Quote Reply |
Add Photo1030 Massey Ferguson
| Steve Coventry
Join Date: Posts: 1
|
2000-12-28 22880
Thanks for the info. Bob Steve ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This