Go BottomTractorpont Parts Now -- NEW Expanded Air Seeder Parts Offering
 | Tractorpoint
Join Date: Oct 2006 Posts: 13 NJ 
|
2023-06-19 201674
NEW Expanded Air Seeder Parts Offering
A&I Products introduces nine new items for an improved air seeding experience. Planning for the next seeding season, whether that be winter wheat in the fall or for canola next spring, A&I Products and Air Seeder Parts LLC have new solutions that will keep growers in the field longer with stainless steel upgrades. Match the benefits of stainless steel with the new X-Series products for grain drills to provide the one-two punch for durability and productivity. Login in to the website and see the flyer.
Stainless Steel Conveyor
24' Stainless Steel Conveyor
Part#: A-CONV200
• Belt installed with improved self-belt cleaning system
• Self-cleaning lower roller installed on stainless shaft
• Solid Neoprene upper roller installed on stainless shaft
• Sealed greaseable bearings – externally mounted
• Upper and lower clean out access.
Fits John Deere Air Seeder Carts: 1900, 1910 (350, 430, 550 Bushel)
Stainless Steel Plenum Air Equializer
Stainless Steel Plenum Air Equializer
Part#: A-PLEQUAL
• Stainless Steel construction
• Designed to lift air into the middle of the plenum and disperse equally into all of the tubes.
Fits John Deere Air Seeder Carts: 1900, 1910
Steel Depth Adjuster Arm
Steel Depth Adjuster Arm
Part#: A-ADJARM
• Machined from Solid Steel
• Universal for both left and right openers
• Additional ratchet opening for leverage with sticky gauge wheels
• Relief cuts allow for maintained tension on gauge wheel even after wear
Fits John Deere Grain Drill: H540F, H550F, H560F, N530, N530C, N530F, N536, N536C, N540, N540C, N540F, N542, N542C, N543F, N550, N560, N560F, 750A, 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990
Depth Adjuster Bracket & Handle
Depth Adjuster Bracket & Handle
Part#: A-ADJBRKH
• Made from thicker gauge steel than original
• 50% larger slots & pins increase life by nearly doubling wear surfaces
• 50% larger handle allows easier adjustment
• Large handle hole allows socket to fit for installation
Fits John Deere Grain Drill: 750A, 1560, 1565, 1590, 1690, 1835, 1860, 1890, 1895, 1990
Seed Boot Stiffener Bracket
Seed Boot Stiffener Bracket
Part#: A-ASPBRKL & A-ASPBRKR
• No drilling required
• Moves worn seed boot back to original position
• Can be installed without disassembling row unit
• LH & RH Available
Fits John Deere Grain Drill: 1590, 1890, 1895, 1990
Main Pin & Bushing Kit
Main Pin & Bushing Kit
Part#: A-ASPMAIN
• 50% increase in wear surface
• 1/2" shoulder added to bushing to increase surface area
• Pin end includes 1/2” ratchet opening for rotation
• Timing index marks aid in tracking rotation
Fits John Deere Grain Drill: H540F, H550F, H560F, N530, N530C, N530F, N536, N536C, N540, N540C, N540F, N542, N542C, N543F, N550, N560, N560F, 750A, 1560, 1565, 1590, 1690, 1820, 1830, 1835, 1860, 1890, 1895, 1990, 2510H
Firming Wheel Pivot Rebuild Kit
Firming Wheel Pivot Rebuild Kit
Part#: A-FWPIVOT
• 33% Increase in wear surface
• O-Ring inside of bushing holds grease in, keeps dirt out
• Grease groove includes bleed-off hole to indicate when fully greased
• Wider bushing for arm side with heavier load
Fits John Deere Grain Drill: 1590, 1690, 1835, 1890, 1895, 1990
Closing Wheel Pivot Rebuild Kit
Closing Wheel Pivot Rebuild Kit
Part#: A-CWPIVOT
• 33% Increase in wear surface
• O-Ring inside of bushing holds grease in, keeps dirt out
• Grease groove includes bleed-off hole to indicate when fully greased
• Wider bushing for arm side with heavier load
Fits John Deere Grain Drill: N530, N530C, N530F, N536, N536C, N540, N540C, N540F, N542, N542C, N543F, N550, N560, N560F, 750A, 1590, 1890, 1895, 1990
Drop-in Filler
Drop-in Filler
Part#: A-DIPSEAL
• Plastic material
• Converts 8 run Boss meter housings to 4 or 6 runs
Fits John Deere Air Seeder Cart: 1900, 1910, C650
Reply to |
Quote Reply |
Add Photo
Go Top
Share This