Go BottomCub Cadet 5234D front axel oil seal replacement
 | RodCadet
Join Date: May 2023 Posts: 3 
|
2023-05-08 201597
`Can anyone help me with how to replace the oil seal on the front axle of a Cub Cadet 5234D tractor? I have the housing off and everything apart. I am stuck or cannot get the bearings off of the housing kingpin. I do not want to damage the bearings by hammering them to hard to remove. Are the bearings stamped on? There is no lock ring or anything holding it on that I can see. Or do I just need to hit it harder? Thanks for any guidance on this.
Reply to |
Quote Reply |
Add PhotoCub Cadet 5234D front axel oil seal replacement
| deepwater52
Join Date: May 2023 Posts: 2
|
2023-05-09 201601
I did mine a few years ago and I had to use a impact hammer with a pointed chisel to get something out, probably was a bearing. If you get the exploded parts diagram from someplace like partstree it will show which parts go where. The only thing not clear was which way the seals went in, open side up or down. ....
Reply to |
Quote Reply |
Add PhotoCub Cadet 5234D front axel oil seal replacement
| RodCadet
Join Date: May 2023 Posts: 3
|
2023-05-11 201609
....
Picture Link
Reply to |
Quote Reply |
Add PhotoCub Cadet 5234D front axel oil seal replacement
| RodCadet
Join Date: May 2023 Posts: 3
|
2023-05-11 201610
Thanks for this info. I do have the parts diagram. Just wanting to make sure I can use a gear puller or hammer that bearing off and don't wreck anything. Thanks. ....
Reply to |
Quote Reply |
Add PhotoCub Cadet 5234D front axel oil seal replacement
| deepwater52
Join Date: May 2023 Posts: 2
|
2023-05-11 201612
I used an electric hammer/drill with a pointed shank and it was a bear to get out. I had the housing in a holder and carefully went at it. My only booboo was to put one of the seals back in upside down because at the time I wasnt sure which way it went ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This