Go BottomSteiner 450 eating belts
 | JLStock
Join Date: Jun 2021 Posts: 2 Edinboro PA 
|
2021-06-08 200371
My Steiner 450 is eating belts. I replaced my Maine belt this past winter, it was freezing cold and sucked. Now my PTO pulley is hitting frame, suggest I replace belt or spring so I am replacing both. When I took PTO belt off I noticed my main belt is missing about 15 to 20% of the teeth so I need to replace that AGAIN !
Is Kevlar the answer or are there other issues?
Also, what is the trick to put tension spring on ? I had an incredibly tough time putting that back on the last time. I think I am likely not seeing a trick that the pro’s use.
Thanks for your time
Reply to |
Quote Reply |
Add PhotoSteiner 450 eating belts
| bosco2
Join Date: Jul 2003 Posts: 22
|
2021-07-08 200414
It could be that the spindles are binding or just worn out. And yes it is a pain to remove and replace the belts.
Probably help if the belt is left out in the hot sun to warm up. ....
Reply to |
Quote Reply |
Add PhotoSteiner 450 eating belts
| JLStock
Join Date: Jun 2021 Posts: 2 Edinboro PA
|
2021-07-08 200415
|
Quote:
|
....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This