Go Bottom

---

1070 starting problem

reelsolution Join Date: Feb 2011 Posts: 6 alabama

2011-02-26          177042

hello,
i have a 1070 with the yanmar. when i turn the key on, sometimes it clicks and the indicator lights come on - and sometimes it does not click. if it does click, and the lights come on, when i try to crank it, nothing happens and the lights go off. battery is strong. ground is strong.

if anyone has any ideas, i would appreciate it.

thanks!

Reply to | Quote Reply | Add Photo

---

1070 starting problem

Equipwrench Join Date: Feb 2011 Posts: 2 Massachusetts

2011-02-28          177095

There are several potential problems. A couple of questions need to be answered. Does the engine turn over by hand by that I mean can you manualy turn the crank?, how many hrs on the unit?, Is this a new problem or progressive problem, what is a strong battery? how many volts DC are registered, Will it start with cables or jump pak? Some possible problems could be bad gound, dead spot on starter, faulty key switch, problem with neutal saftey switch, sized starter, bad solonoid, corrosion in wiring. If you can give some more symtoms and oberervations I'll try to get you through it as beast as I can with out seeing it. ....

Reply to | Quote Reply | Add Photo

---

1070 starting problem

reelsolution Join Date: Feb 2011 Posts: 6 alabama

2011-02-28          177096

thanks alot.

just used jumper cables to jump from the battery to the starter, and from the battery to a ground. it took a few tries, but it turned over (hesitating) and then started.

so i'm going to replace the ground cable and the hot cable and see if that cures it.

before this, it was not turning over at all. it would click, and the the indicator lights on the dash would go off.... no power at all.

thanks alot. appreciate your time! ....

Reply to | Quote Reply | Add Photo

---

1070 starting problem

dennisj73 Join Date: Oct 2011 Posts: 3 Pa

2011-10-19          180936

It sounds like the same problem that I am having with my 1070. Did you get it resolved? What was wrong? Thanks! ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !