Go BottomJohn Deere 4310 wont move
 | sparky10
Join Date: Apr 2010 Posts: 4 wisconsin 
|
2010-04-19 170112
I have a 2004 4310 ehydro that won't move problem firse started tractor would move after pressing pedals several times now when I started it yesterday it won't move at all flashing error code appears to be 1 long 3 short HELP!
Reply to |
Quote Reply |
Add PhotoJohn Deere 4310 wont move
| hardwood
Join Date: Dec 2002 Posts: 3583 iowa 
|
2010-04-19 170113
Sparky;
That code indicates the hydro is trying to recieve both forward and reverses signals at the same time from the pedals. It doesn't say anything about something wrong with the hydro drive it's self just the controlers. From there on I can't help you. ....
Reply to |
Quote Reply |
Add PhotoJohn Deere 4310 wont move
| sparky10
Join Date: Apr 2010 Posts: 4 wisconsin
|
2010-04-19 170114
Thanks so much just my luck it could not have been something simple I am going to check the code again ....
Reply to |
Quote Reply |
Add PhotoJohn Deere 4310 wont move
| sparky10
Join Date: Apr 2010 Posts: 4 wisconsin
|
2010-04-19 170118
Hardwood thank you again I just went out and pulled both pedals back and started up the tractor no error code so got on and she went forwards stopped and went to go into rev. and same thing as before pulled back on both pedals and went in rev. it appears that the pedals are hanging up Thanks again for your help I don't think I'm screwed after all. ....
Reply to |
Quote Reply |
Add PhotoJohn Deere 4310 wont move
| hardwood
Join Date: Dec 2002 Posts: 3583 iowa
|
2010-04-19 170119
Sparky;
My 4310 is a 12/12 reverser transmission so I couldn't look under mine to see what's there. I did look it up in my service manual and by the looks of it there are several little levers, pins, etc that might be dry and need a bit of WD-40 or sometning to limber them up. Frank. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This