Go BottomRetro fit Mid PTO
 | LenCravens
Join Date: Jan 2009 Posts: 10 Montana 
|
2009-01-10 159273
What is involved in retro fitting a mid- PTO onto a JD 4410 ?
Is it require a different transmission or is it an external addition?
Reply to |
Quote Reply |
Add PhotoRetro fit Mid PTO
 | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan 
 Pics
|
2009-01-10 159275
Retrofit, to my mind, means installing something that isn't designed for a certain application. Is this what you mean, or do want to install one designed for your machine? ....
Reply to |
Quote Reply |
Add PhotoRetro fit Mid PTO
| hardwood
Join Date: Dec 2002 Posts: 3583 iowa
|
2009-01-10 159276
Len; I don't think a different transmission is required but there will be internal parts to install. A shaft from the bottom gear of the rear PTO comes forward where you see the frost plug looking plug about 2 inch diamater plug on the lower part of the rear housing. The clutch that controls the mid PTO is just inside the housing where the mid PTO sticks out. The rear PTO must be running to make the center one function. Frank ....
Reply to |
Quote Reply |
Add PhotoRetro fit Mid PTO
| earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan
Pics
|
2009-01-10 159293
Frank, you're green so you should know about the set up. I'm thinking wouldn't it be unsafe to have the rear PTO engaged to make the mid function? My blue has a separate lever for each. Each PTO is all mechanically controlled--no electric clutches. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This