Go Bottom

---

John Deere 4100 HST Issue

Mdenz3 Join Date: Dec 2007 Posts: 3 Northwest, SC

2007-12-16          149361

Hi, I am having an issue with my John Deere 4100 w/ 4WD, and HST transmission.

The rubber lines that go to the cooler up infront of the radiator are blowing off. Any suggestions or ideas? Thanks in advance.

Reply to | Quote Reply | Add Photo

---

John Deere 4100 HST Issue

earthwrks Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan   Pics

2007-12-16          149362

Might be a clogged filter that is creating backpressure? Not sure though. There was a guy here with a New Holland that had his cooler and filter blow a leak too. ....

Reply to | Quote Reply | Add Photo

---

John Deere 4100 HST Issue

hardwood Join Date: Dec 2002 Posts: 3583 iowa

2007-12-16          149363

Mendz3; You use the term "lines", is it always the same line or has one blown off then the other? If it is always the same line then perhaps something in the cooler is causing a restriction. If it blows a hose on either side of the cooler, then maybe the return line has gotten pinched. Frank. ....

Reply to | Quote Reply | Add Photo

---

John Deere 4100 HST Issue

Mdenz3 Join Date: Dec 2007 Posts: 3 Northwest, SC

2007-12-16          149364

It first blew the left side hose. So I fixed it, topped of the fluid and tightened the other hose clamps aswell. Shortly there after it blew the hose on the right side off.

Thanks fo the tip on a pinched line, I'll go inspect them now. :) ....

Reply to | Quote Reply | Add Photo

---

John Deere 4100 HST Issue

Mdenz3 Join Date: Dec 2007 Posts: 3 Northwest, SC

2007-12-16          149365

Well pinched line it is. The return line is smashed flat right where it turns to go back into the transmission. Looks like the mower deck came up to far and squished it.

Thank you all for your advice and help. ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !