Go BottomJD4100 3rd and or 4 select valve
 | Tom Fenelon
Join Date: Posts: 1 
|
2000-01-31 12408
I am proud owner of JD4100. Have many attachments/accessories but would like help with possible upgrade. If I want to add a 3rd or 4th hydraulic select vavle, currently have joystick for dual select (2 circuit) control, where would the extra valves go? I want to be able to have hyd top link and angling on a rear blade while running loader on the front. I am assuming Deere would place then on the floor opposite the joystick?Tom in Central Illinois
Reply to |
Quote Reply |
Add PhotoJD4100 3rd and or 4 select valve
| JeffM
Join Date: Posts: 1
|
2000-02-01 12439
Tom, On the 4200-4400, the 3rd selective control valve lever is mounted on the right fender (in front of the cup holder) and a cable runs back to the actual control valve which mounts behind and beneath the seat above the rear pto. I don't know if the 4100 is the same or not. ....
Reply to |
Quote Reply |
Add PhotoJD4100 3rd and or 4 select valve
| Jack in IL
Join Date: Posts: 1
|
2000-02-01 12440
As of now, Deere does not offer additional valves beyond the joystick Dual SCV on the 4100. There is an accessory to provide rear hydraulic coupler outlets, but it is simply 2 pairs of hoses that go from the front ports used for the loader to the rear with outlets mounted under the right rear fender. Thus when using the rear couplers, the fronts cannot be simultaneously used for the loader. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This