Go Bottom

---

mitsubisi kumiai ST1620 3 pt

Scepter46 Join Date: Apr 2006 Posts: 6 Topeka,Ks

2006-04-10          127491

Purchased a ST1620 Kumiai everything worked fine when I bought it, after short time 3 pt will not raise. It makes no difference which position draft control is in. Never heard any noise that would make think it was a pump problem. I'm going to drain system and clean filter. What I'm wandering is there another lever or something I could have accidently hit and it's letting system by-pass.

Reply to | Quote Reply | Add Photo

---

mitsubisi kumiai ST1620 3 pt

BillRodgers Join Date: Jul 2003 Posts: 66 Roanoke, Va.

2006-04-10          127522

I don't think you have a lever problem. Continue what you are doing cleaning the system. You may have some trash in a check valve. Call us if your efforts are unsuccessful and we'll help troubleshoot the problem. Bill - satohparts.com - 1-800-609-5110 ....

Reply to | Quote Reply | Add Photo

---

mitsubisi kumiai ST1620 3 pt

Scepter46 Join Date: Apr 2006 Posts: 6 Topeka,Ks

2006-04-11          127526

Thanks, the problem was filter was plugged and the hyd. oil was filthy. Working fine now. Are you the one that can get the manuals? ....

Reply to | Quote Reply | Add Photo

---

mitsubisi kumiai ST1620 3 pt

BillRodgers Join Date: Jul 2003 Posts: 66 Roanoke, Va.

2006-04-11          127576

Yes, I can supply manuals for your tractor as well as any parts you may need. Email or call 1-800-609-5110 ....

Reply to | Quote Reply | Add Photo

---

mitsubisi kumiai ST1620 3 pt

Scepter46 Join Date: Apr 2006 Posts: 6 Topeka,Ks

2006-04-13          127653

Thanks, what model would be the nearest to compare with my Kumiai? There is not much info to be found on this model. ....

Reply to | Quote Reply | Add Photo

---

mitsubisi kumiai ST1620 3 pt

Scepter46 Join Date: Apr 2006 Posts: 6 Topeka,Ks

2006-07-06          131766

OK, my problem has returned. I did some trouble shooting and found I have pressure to the input of the valve (left side fitting going into trans) pulled top check valve cleaned still no 3 point. My question is what do I look for next? Do I pull top plate and check the inner valve? If so what do I look for? ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !