Go BottomRefilling BX 23 WHEN CHANGING OIL AND UDT
 | lbrown59
Join Date: Posts: 1 
|
2004-10-20 98813
Refilling BX 23 WHEN CHANGING OIL AND UDT.
The following includes new filters when changing.
Mine took 3.5 quarts or 112 Oz. of engine oil to refill the engine.
The transmission took 12.0 quarts or 384 Oz. of Super UDT.
The manual is quite a bit off.
Reply to |
Quote Reply |
Add PhotoRefilling BX 23 WHEN CHANGING OIL AND UDT
| cthonestguy
Join Date: Jun 2004 Posts: 267 northeast
|
2004-10-29 99494
My BX2200 is way off too. I believe it took 1 qt more than the manual stated. Someone told me maybe they put the wrong dipstick in the machine during the assembly process. I checked and it's the right one. I called Kubota directly and they told me to go by the dipstick but couldn't explain why it was off 1qt. Considering it calls for around 2.4 and it took 3.5 I was (and still am) a little worried I am overfilling it. I have close to 300 trouble free hours on the engine now.
As far as my hydro fluid goes....I didn't go crazy measuring that out. I kept pouring until it was at the full make, bleed it out, checked it , refilled it, bled it again and then met the make and it stayed put.
You have more icons next to your name than I do but to those ne tractor owners out there- BE SURE TO TAKE THE STRAINER OUT AND CLEAN IT!!! You won't believe your eyes and you will want to call 911 at your 50 hour service when you see the metal. This is normal and what the strainer was put there for. You won't get rich selling the scrap metal on your strainer but if you don't clean it at every hydro change you will have a big hunk of scrap called your rear end and tranny!
Good post, I'm glad I am not the only one. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This