Go Bottom2008 New Holland T2410 EHSS Stops Moving
 | johnreh
Join Date: Mar 2026 Posts: 2 Kansas 
|
2026-03-22 201961
I have a 2008 T2410 EHSS and it will stop moving but the engine continues to run. Most times I can shut it off and restart it and it will move. I have checked the seat safety. I have made sure the battery terminals are clean. I am out of ideas Any thoughts.
Reply to |
Quote Reply |
Add Photo2008 New Holland T2410 EHSS Stops Moving
| IRONMANAL
Join Date: Dec 2013 Posts: 6 ALABAMA
|
2026-03-22 201962
Most safety switches are kill type though yours could be the exception. I would check the inching valve on the the top of your trans it can get stuck and lose the ability to move. Make sure it can move when you press the pedal, lubricate so it moves freely. Hopefully that is it and it is not a failed the EHSS module which can be pricey. ....
Reply to |
Quote Reply |
Add Photo2008 New Holland T2410 EHSS Stops Moving
| johnreh
Join Date: Mar 2026 Posts: 2 Kansas
|
2026-03-22 201963
I have checked and wired around the seat kill switch. I have checked the inching valve. It works freely and the adjustment appears to be correct. In its prior life this tractor was used to clean calf pens at a small dairy. Though I have owned the tractor for the last 10 years of just normal farmstead service, I am wondering if the switch on the forward/reverse lever may be failing because service cycles. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This