Go Bottom Go Bottom

ck20 backhoe removal

View my Photos
melsfav
Join Date: May 2004
Posts: 5 Louisiana
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-06-01          87477

Anyone have experience removing the backhoe attachment for placement of a box blade? I'd like to know how difficult this is since I'll need both intermittently. Any input would be appreciated. Thanks

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



ck20 backhoe removal

View my Photos
bigtractor
Join Date: Feb 2004
Posts: 22 north florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-06-02          87571

I assume you got a manual and want some easy to understand instructions.
Well here I go:
Drop the outriggers lightly, lay out the boom and put the bucket down on the ground lightly, pull the 2 pins at the rear of the subframe, pull forward about 10 inches, now bump the boom down to lower the front of the subframe several inches (to clear the hitch as you pull out), pop the hyd. lines and drive away. Should take about a minute to do.
You will learn others little personal tricks such as releiving pressure to ease reconnecting quicks etc. etc. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login