Jimna 284 Engine Knocking and leaking oil after Tipping Tractor
razed1022
Join Date: Nov 2014 Posts: 3 colorado |
2014-11-01 191321
Hey all, I have a jimna 284 purchased new in 08 hours unkown.
I was moving dirt to build up driveway and had a full bucket load when I went to turn around my back tire went up on burm and the tractor almost tipped over on its side. I was in soft sand and it went to about 45 degrees over and stayed there for a min until i could slowly let the bucket down and get all four back on the ground. right before it went back down the engine started knocking and I shut off the motor. about 3 qts of oil came out. Heres the weird thing, along with oil 4 bolts also fell out into puddle of oil, I have a feeling they are oil pan bolts.
I added some oil and tried to start but it started knocking loud and oil I put in came out. looks like oil is coming from up behind crank pulley.
My question can I purchase a replacement engine? anyone knows who would sell one?
Thanks, Thomas
Reply to | Quote Reply | Add Photo
Jimna 284 Engine Knocking and leaking oil after Tipping Tractor
greyhorse
Join Date: Jun 2013 Posts: 65 Pics |
2014-11-09 191375
Getting a ton of oil in the cylinders can be major problem. I would be looking into the gaskets being blown. But the bolts popping out has be buggered!
....
Reply to | Quote Reply | Add Photo
Jimna 284 Engine Knocking and leaking oil after Tipping Tractor
razed1022
Join Date: Nov 2014 Posts: 3 colorado |
2014-11-10 191385
You are correct. I pulled the head and oil pan "bottom plate". Rods/cyl's & sleeves look new still solid. I think that's all it was. The bolts came from the upper part of the oil sump I guess its called. All the bolts on one side shook loose and thats where the oil was coming from. The holes are stripped so looks like I just need to tap'em and put new head gasket on and I should be good.
Thomas ....
Reply to | Quote Reply | Add Photo
Jimna 284 Engine Knocking and leaking oil after Tipping Tractor
greyhorse
Join Date: Jun 2013 Posts: 65 Pics |
2014-11-10 191386
Great, was there much oil in the cylinders? Hope it works out for you.
....
Reply to | Quote Reply | Add Photo
Go Top
Share This