Go Bottom Go Bottom

front spindles

View my Photos
chuck89d
Join Date: Jul 2009
Posts: 2 Douglasville GA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2009-07-09          163923

I have a YM-1500D 4x4, the left front spindle is very loose. Have not ordered a manual yet, is this an adjustment possibly?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



front spindles

View my Photos
greg_g
Join Date: Jan 2004
Posts: 1816 Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2009-07-09          163924

Technically, the front drive doesn't employ a spindle - that's essentially a 2wd design. If yours is "loose", I'm afraid the odds are pretty good that it's simply worn out. Click on the link below for a representative diagram.

I seem to recall they used the drag link system of steering though. If you're lucky, perhaps it just needs a new knuckle on that side.

//greg// ....


Link:   typical Yanmar front drive

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



front spindles

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2009-08-09          164795

There is not an adjustment. I can supply parts & manuals. Authorized Yanmar tractor & industrial dealer with aftermarket & used parts available. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login