S373D Broken Lower Link Pin: Mitsubishi  -- Other Tractor Brands Discussion Forum and Review S373D Broken Lower Link Pin: Mitsubishi -- Other Tractor Brands Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Mitsubishi Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 08-20-2010, 22:37 Post: 173328
s373dNewbie



Join Date: Aug 2010
Location: Washington State
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 7
 S373D Broken Lower Link Pin

Hello guys, had my tractor going great, after I got the overheating issue fixed. But it broke the Lower Link Pin. Looking at the other side, and what's left of the broken one, they seem like they screw on, but there is no way to turn it unless you put a bar through the hole in it.
I see that the Link Pins seem to be part of an assembly that also holds the Rear Differential in place, so removing that seems like is not the intended way to go.

Any thoughts?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

 08-21-2010, 11:16 Post: 173336
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853
 S373D Broken Lower Link Pin

The hole is for a pin, clip or nut and bolt. If the machine is anything like the old Fords, you will have to remove both axle halves to replace the pins which are only accessible from INSIDE. If you try to tighten using the pin hole, you may luck out and it will tighten. But again, not likely. Fords had a seal around the pin which leaked from the pin wobbling from being loose.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Mitsubishi Forum

Thread 173328 Filter by Poster:
earthwrks 1 | s373dNewbie 1 |




Most Viewed

+ Satoh S650G
+ Mitsubishi MT372D
+ front end Satoh Beaver 370
+ What gear should I brush hog in
+ Need help with my Mt 372
+ Hyd pump Satoh Bull Diesel
+ D2350 FD
+ FS: Mitsubishi MT 372
+ Mitsubishi D1600
+ tractor stalls after 1 hour

Most Discussion

+ DONT BUY FROM CORRIHER
+ tractor stalls after 1 hour
+ Need help with my Mt 372
+ Oil Specs
+ MT3201FD Mitsubishi Tractor
+ front end Satoh Beaver 370
+ Mitsubishi MT372D
+ help on cranking
+ Hyd pump Satoh Bull Diesel
+ 2350fd has developed a injecto

Newest Topics

+ d1600 grill
+ Mitsubishi D2000
+ MT372 Front Loader Installation
+ MT372 Front Loader Installation
+ Mitsubushi D2650FD tractor box blade won t lift
+ MT372 for sale in Illinois
+ D1600 voltage regulator
+ Mitsubishi hydraulic screen
+ Mitsubishi Manuals
+ Mitsubishi MT372 does not start













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines